tmp88cs38ng TOSHIBA Semiconductor CORPORATION, tmp88cs38ng Datasheet - Page 18

• Manufacturer Part Number: tmp88cs38ng
• Description: Cmos 8-bit Microcontroller
• Manufacturer: TOSHIBA Semiconductor CORPORATION

is made with the interrupt master enable flag (IMF). Releasing the IDLE mode returns
from IDLE to NORMAL.
Note: When a watchdog timer interrupt is generated immediately before the IDLE mode is
a.
b.
IDLE mode includes a normal release mode and an interrupt release mode. Selection
Normal release mode (IMF = “0”)
interrupt enable flag (EF) or an external interrupt 0 (
Execution resumes with the instruction following the IDLE mode start instruction
(e.g., [SET (SYSCR2). 4]). Normally, IL (Interrupt latch) of interrupt source to
release IDLE mode must be cleared by load instructions.
Interrupt release mode (IMF = “1”)
source enabled with the individual interrupt enable flag (EF) or an external
interrupt 0 (
resumes from the instruction following the instruction which started IDLE mode.
IDLE mode is released by any interrupt source enabled by the individual
IDLE mode is released and interrupt processing is started by any interrupt
started, the watchdog timer interrupt will be processed but IDLE mode will not be
started.
INT0
pin) request. After the interrupt is processed, the execution
88CS38-18
TMP88CS38/CM38A/CP38A
INT0
pin) request.
2007-09-12