PIC18F65J90-I/PT Microchip Technology, PIC18F65J90-I/PT Datasheet - Page 164

• Manufacturer Part Number: PIC18F65J90-I/PT
• Description: IC PIC MCU FLASH 16KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F65J90-I/PT

• Core Size: 8-Bit
• Program Memory Size: 32KB (16K x 16)
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, LVD, POR, PWM, WDT
• Number Of I /o: 51
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Controller Family/series: PIC18
• No. Of I/o's: 51
• Ram Memory Size: 2KB
• Cpu Speed: 40MHz
• No. Of Timers: 4
• No. Of Pwm Channels: 2
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: AUSART, EUSART, I2C, SPI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 51
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM183030
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• Package: 64TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162079 - HEADER MPLAB ICD2 18F85J90 64/80AC164327 - MODULE SKT FOR 64TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC18F85J90 FAMILY
15.2
The LCD driver module generates its internal clock
from 3 possible sources:
• System clock (F
• Timer1 oscillator
• INTRC source
The LCD clock generator uses a configurable
divide-by-32/divide-by-8192 postscaler to produce a
baseline frequency of about 1 kHz nominal, regardless
of the source selected. The clock source selection and
the postscaler configuration are determined by the
Clock Source Select bits, CS1:CS0 (LCDCON<3:2>).
An additional programmable prescaler is used to derive
the LCD frame frequency from the 1 kHz baseline. The
prescaler is configured using the LP3:LP0 bits
(LCDPS<3:0>) for any one of 16 options, ranging from
1:1 to 1:16.
Proper timing for waveform generation is set by the
LMUX1:LMUX0 bits (LCDCON<1:0>). These bits
determine which Commons Multiplexing mode is to be
used, and divide down the LCD clock source as
required. They also determine the configuration of the
ring counter that is used to switch the LCD commons
on or off.
15.2.1
In addition to the clock source for LCD timing, a
separate 31 kHz nominal clock is required for the LCD
charge pump. This is provided from a distinct branch of
the LCD clock source.
FIGURE 15-2:
DS39770B-page 162
INTOSC 8 MHz Source
System Clock (F
Internal 31 kHz Source
Timer1 Oscillator
LCD Clock Source
LCDCON<3:2>
LCD VOLTAGE REGULATOR
CLOCK SOURCE
OSC
OSC
/4)
/4)
LCD CLOCK GENERATION
2
LCDCON<1:0>
LCDREG<1:0>
00
01
1x
÷256
÷2
÷4
Preliminary
2
00
01
10
11
2
oscillator or the INTRC source, as well as the 8 MHz
prescaler). The charge pump clock source is configured
The charge pump clock can use either the Timer1
INTOSC source (after being divided by 256 by a
using the CKSEL1:CKSEL0 bits (LCDREG<1:0>).
15.2.2
When using the system clock as the LCD clock source,
it is assumed that the system clock frequency is a nom-
inal 32 MHz (for a F
Because the prescaler option for the F
selection is fixed at divide-by-8192, system clock
speeds that differ from 32 MHz will produce frame
frequencies and refresh rates different than discussed
in this chapter. The user will need to keep this in mind
when designing the display application.
The Timer1 and INTRC sources can be used as LCD
clock sources when the device is in Sleep mode. To
use the Timer1 oscillator, it is necessary to set the
T1OSCEN bit (T1CON<3>). Selecting either Timer1 or
INTRC as the LCD clock source will not automatically
activate these sources.
Similarly, selecting the INTOSC as the charge pump
clock source will not turn the oscillator on. To use
INTOSC, it must be selected as the system clock
source by using the FOSC2 Configuration bit.
If Timer1 is used as a clock source for the device, either
as an LCD clock source or for any other purpose, LCD
segment 32 become unavailable.
Programmable
LCDPS<3:0>
11
10
01
1:1 to 1:16
Prescaler
4
CLOCK SOURCE
CONSIDERATIONS
÷8192
÷32
or
© 2007 Microchip Technology Inc.
OSC
/4 frequency of 8 MHz).
Ring Counter
to LCD Charge Pump
÷1, 2, 3, 4
31 kHz Clock
OSC
COM0
COM1
COM2
COM3
/4 clock