PIC18F27J13-I/SS Microchip Technology, PIC18F27J13-I/SS Datasheet - Page 221

• Manufacturer Part Number: PIC18F27J13-I/SS
• Description: IC PIC MCU 128KB FLASH 28SSOP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J13-I/SS

• Core Size: 8-Bit
• Program Memory Size: 128KB (64K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Digital Ic Case Style: SSOP
• Supply Voltage Range: 1.8V To 5.5V
• Embedded Interface Type: I2C, SPI, USART
• Rohs Compliant: Yes
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: I2C, SPI, EUSART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 19
• Number Of Timers: 8
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: DM164128, DM180021, DM183026-2, DV164131, MA180030, DM183022, DM183032, DV164136, MA180024
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 10 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180030 - BOARD DEMO PIC18F47J13 FS USBMA180029 - BOARD DEMO PIC18F47J53 FS USB
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

15.0
The Timer3/5 timer/counter modules incorporate these
features:
• Software selectable operation as a 16-bit timer or
• Readable and writable 8-bit registers (TMRxH
• Selectable clock source (internal or external) with
• Interrupt-on-overflow
• Module Reset on ECCP Special Event Trigger
 2010 Microchip Technology Inc.
counter
and TMRxL)
device clock or Timer1 oscillator internal options
Note: Throughout this section, generic references
TIMER3/5 MODULE
are used for register and bit names that are the
same – except for an ‘x’ variable that indicates
the item’s association with the Timer3 or
Timer5 module. For example, the control
register is named TxCON, and refers to
T3CON and T5CON.
Preliminary
PIC18F47J13 FAMILY
A simplified block diagram of the Timer3/5 module is
shown in Figure 15-1.
The Timer3/5 module is controlled through the TxCON
register (Register 15-1). It also selects the clock source
options for the ECCP modules. (For more information,
see Section 19.1.1 “ECCP Module and Timer
Resources”.)
The F
ECCP capture/compare features. If the timer will be
used with the capture or compare features, always
select one of the other timer clocking options.
OSC
clock source should not be used with the
DS39974A-page 221