PIC18F27J13-I/SS Microchip Technology, PIC18F27J13-I/SS Datasheet - Page 58

• Manufacturer Part Number: PIC18F27J13-I/SS
• Description: IC PIC MCU 128KB FLASH 28SSOP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J13-I/SS

• Core Size: 8-Bit
• Program Memory Size: 128KB (64K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Digital Ic Case Style: SSOP
• Supply Voltage Range: 1.8V To 5.5V
• Embedded Interface Type: I2C, SPI, USART
• Rohs Compliant: Yes
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: I2C, SPI, EUSART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 19
• Number Of Timers: 8
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: DM164128, DM180021, DM183026-2, DV164131, MA180030, DM183022, DM183032, DV164136, MA180024
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 10 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180030 - BOARD DEMO PIC18F47J13 FS USBMA180029 - BOARD DEMO PIC18F47J53 FS USB
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC18F47J13 FAMILY
4.6.9
Deep
Register 4-1 through Register 4-6.
REGISTER 4-1:
REGISTER 4-2:
DS39974A-page 58
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6-3
bit 2
bit 1
bit 0
Note 1:
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-3
bit 2
bit 1
bit 0
Note 1:
DSEN
R/W-0
U-0
—
Sleep
(1)
In order to enter Deep Sleep, Sleep must be executed within 2 instruction cycles after setting DSEN.
This is the value when V
DEEP SLEEP MODE REGISTERS
mode
DSEN: Deep Sleep Enable bit
1 = Deep Sleep mode is entered on a SLEEP command
0 = Sleep mode is entered on a SLEEP command
Unimplemented: Read as ‘0’
Reserved: Maintain as ‘0’
DSULPEN: Ultra Low-Power Wake-up Module Enable bit
1 = ULPWU module is enabled in Deep Sleep
0 = ULPWU module is disabled in Deep Sleep
RTCWDIS: RTCC Wake-up Disable bit
1 = Wake-up from RTCC is disabled
0 = Wake-up from RTCC is enabled
Unimplemented: Read as ‘0’
ULPWDIS: Ultra Low-Power Wake-up Disable bit
1 = ULPWU wake-up source is disabled
0 = ULPWU wake-up source is enabled (must also set DSULPEN = 1)
DSBOR: Deep Sleep BOR Event Status bit
1 = DSBOREN was enabled and V
0 = DSBOREN was disabled or V
RELEASE: I/O Pin State Release bit
Upon waking from Deep Sleep, the I/O pins maintain their previous states. Clearing this bit will
release the I/O pins and allow their respective TRIS and LAT bits to control their states.
but did not fall below V
Sleep
U-0
U-0
—
—
DSCONH: DEEP SLEEP CONTROL HIGH BYTE REGISTER (BANKED F4Dh)
DSCONL: DEEP SLEEP LOW BYTE CONTROL REGISTER (BANKED F4Ch)
registers
r = Reserved bit
W = Writable bit
W = Writable bit
‘1’ = Bit is set
‘1’ = Bit is set
are
U-0
U-0
DD
—
—
is initially applied.
provided
DSBOR
(1)
U-0
U-0
Preliminary
—
—
DD
DD
in
dropped below the DSBOR arming voltage during Deep Sleep,
did not drop below the DSBOR arming voltage during Deep
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U-0
U-0
—
—
ULPWDIS
R/W-0
R/W-0
r
 2010 Microchip Technology Inc.
x = Bit is unknown
x = Bit is unknown
DSULPEN
R/W-0
DSBOR
R/W-0
(1)
RTCWDIS
RELEASE
R/W-0
R/W-0
(1)
bit 0
bit 0