AT32UC3B0256-Z2UT Atmel, AT32UC3B0256-Z2UT Datasheet - Page 593

• Manufacturer Part Number: AT32UC3B0256-Z2UT
• Description: IC MCU AVR32 256KB FLASH 64-QFN
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3B0256-Z2UT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 60MHz
• Connectivity: I²C, IrDA, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 44
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-QFN
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: 2-Wire, SPI, USART
• Maximum Clock Frequency: 60 MHz
• Number Of Programmable I/os: 44
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATEXTWIFI, ATEVK1101
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Package: 64QFN EP
• Device Core: AVR32
• Family Name: AT32
• Maximum Speed: 60 MHz
• Operating Supply Voltage: 1.8|3.3 V
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMR770-1008 - ISP 4PORT ATMEL AVR32 MCU SPIATSTK600-TQFP64-2 - STK600 SOCKET/ADAPTER FOR 64-TQFATEVK1101 - KIT DEV/EVAL FOR AVR32 AT32UC3B
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

27.4.3
Figure 27-4. JTAG and Boundary-scan Access
27.4.4
Table 27-6.
27.4.5
27.4.5.1
32059K–03/2011
Pin Name
TCK
TMS
TDI
TDO
JTAG master
Block Diagram
I/O Lines Description
Product Dependencies
2nd JTAG
TMS
TMS
I/O Lines
I/O Line Description
device
TCK
TCK
Test Mode Select, sampled on rising TCK.
Pin Description
Test Clock Input. Fully asynchronous to system clock frequency.
Test Data In, sampled on rising TCK.
Test Data Out, driven on falling TCK.
TDO TDI
TDO
TDI
In order to use this module, other parts of the system must be configured correctly, as described
below.
The TMS, TDI, and TDO pins are multiplexed with I/O lines. When the JTAG is used the associ-
ated pins must be enabled. To enable the JTAG pins, refer to
TCK
TMS
TDO
TDI
JTAG
Instruction Register
Instruction register
scan enable
Controller
TAP
32-bit AVR device
JTAG data registers
Part specific registers
Device Identification
Service Access Bus
By-pass Register
Reset Register
Data register
Boundary scan enable
scan enable
interface
Register
SAB
...
Input
Output
Type
Input
Input
Internal I/O
Section
lines
27.4.7.
AT32UC3B
Active Level
593