CV500BC051 Omron, CV500BC051 Datasheet - Page 62

• Manufacturer Part Number: CV500BC051
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500BC051

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Data Links Procedures
2. Prepare for communications.
3. Turn ON the power to the PLC.
4. Connect the Programming Device.
5. Create I/O tables.
6. Set the data link mode.
a. Set the unit num-
b. Set the node
c. Set the baud rate.
d. Set the operating
e. Set the terminal
Turn ON the power to
the PLC.
Connect the Program-
ming Console or Con-
troller Link Support
Software.
Enable 62 nodes for a
wired network.
Set data link mode to
manual.
Set the data link status
storage format. (CS/
CJ Series only)
Create the I/O tables.
ber.
address.
level.
resistance
Contents
Contents
Contents
Contents
Contents
Use the front rotary
switches.
Use the front rotary
switches.
Use the DIP switch.
Use the DIP switch.
Use the front switch
for CVM1, CV-series,
CS/CJ-series, and
CQM1H-series PLCs
or the bottom switch
for C200HX/HG/HE
PLCs.
---
Use the special con-
nection cable.
Use Support Soft-
ware for the PLC or
the Programming
Console.
Use Support Soft-
ware for the PLC or
the Programming
Console. (See note b.)
Use Support Soft-
ware for the PLC or
the Programming
Console.
Use the Support Soft-
ware or Programming
Console.
Method
Method
Method
Method
Method
CS/CJ-series, CVM1,
and CV-series PLCs
only
All nodes
All nodes
C200HX/HG/HE PLCs
only
All nodes
End nodes on the net-
work: ON
All other nodes: OFF
All nodes
CS/CJ-series, CVM1,
and CV-series PLCs
only
All nodes
Note: This setting
must be made to con-
struct a network that
uses a node address
higher than 32 (See
note a.)
Data link startup node
only
The node that is used
to start the data links
is called the startup
node. It is necessary
to decide beforehand
which node will be the
startup node.
Data link startup node
only (See note c.)
CS/CJ-series, CVM1,
and CV-series PLCs
only
Nodes
Nodes
Nodes
Nodes
Nodes
Section 2-1
100
97, 101
97, 101
97
98, 101
---
23
80
115
162
---
Page
Page
Page
Page
Page
37