NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 11

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

3
Safety Precautions
Safety Precautions
!
!
WARNING
Caution
Read these safety precautions carefully and make sure you understand them
before using the Programmable Terminal so that you can use it safely and cor-
rectly.
S Never attempt repairs, modification or disassembly. You could sustain an elec-
S Switch OFF the PT power before changing the backlight. You could sustain an
S When disposing of a used backlight, comply with all local restrictions that apply
S When replacing the battery, do not allow the battery terminals to touch the
S If not backed up by the built-in battery, the memory switch settings will be initial-
S Switch OFF the power supply to both the PT and the B7A Interface Unit before
S Switch OFF the power supply to both the PT and the B7A Interface Unit before
S Do not use input functions, such as PT touch switches, for applications where
S Do not use the expanded I/O functions of the B7A Unit for applications where
S On unpacking the PT, check its external appearance and confirm that there is
S During work at the panel, be sure that no metal scraps enter the PT. Otherwise,
S The thickness of applicable operation panel is 1.6 mm to 4.8 mm. All fittings
S Carefully check wiring before switching ON the power.
tric shock.
electric shock if you attempt to change the backlight while power is being sup-
plied.
to its disposal.
board in the PT.
ized to the values set with the NT-series Support Tool when the power is turned
OFF. If a message indicating that the battery is low is displayed while the PT is
being used, replace the built-in battery immediately. For details on how to re-
place the battery, refer to Replacing the Battery (page 253).
installing the B7A Interface Unit, otherwise the PT or the B7A Interface Unit
may be damaged.
changing DIP switch settings.
danger to human life or serious property damage is possible or for emergency
switch applications.
danger to human life or serious property damage is possible or for emergency
switch applications.
no damage. Also confirm that there is no abnormal noise on shaking the PT
lightly. The PT may malfunction if it is damaged.
the PT may malfunction.
must be tightened uniformly to a torque of 0.5 to 0.6 N⋅m in order to ensure
water- and dust- resistance. The panel must not be soiled or warped, and must
be able to support an installation that will remain secure and strong.
xiii
3