NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 265

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

254
Maintenance of the NT30/30C
Caution
3. Remove the battery that is secured under the battery cover, grip the cable,
4. Insert the connector of the new battery into the connector on the NT30/30C
5. Close the battery cover, making sure that the cable is not trapped.
When replacing a battery, ensure that the battery terminal does not touch the
board in the NT30/30C.
er instead of your fingers since this will cause scratching or damage the com-
ponents inside the cover.
and pull the connector straight out.
and fit the battery under the battery cover.
When inserting the battery connector, make sure that the projection on it
faces to the left, and press it fully home while keeping it straight.
The connector of the new battery must be connected within 5 minutes after
disconnecting the old battery’s connector. However, the battery can be re-
placed while the NT30/30C power is ON, and in this case there is no time
restriction.
Section
6-3