NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 48

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

36
Connection to a PC by Host Link via RS-232C
DIP Switch Setting for C200HX/HG/HE(-Z), CQM1, CQM1H
With the C200HX/HG/HE(-Z), CQM1, and CQM1H, in order that the PC Setup
settings (data memory) are enabled, set the DIP switch on the front panel in the
way shown below.
When using the peripheral port on the CQM1H, set DIP switch pin 7 to ON also.
DIP Switch Setting for CPM2A
With the CPM2A, in order that the PC Setup settings (data memory) are
enabled, set the DIP switch on the front panel in the way shown below.
C200HX/HG/HE(-Z)
RS-232C Port Communications Conditions Setting
Set SW5 to OFF to enable the settings made in PC Setup.
CQM1
CQM1H
Set the communications
setting switch to OFF
(down position).
Section
2-5