NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 89

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

System Menu Items
Switching from the System Menu to the RUN Mode
3-4
78
Initializing Memory
Initializing Memory
Reference
The System Menu items and the functions are as given below.
The NT30/30C will exit the System Menu and switch to the RUN mode in the
cases mentioned below.
If the NT30/30C is used for the first time or if the screen data is ruined and the
NT30/30C cannot be normally started, the memory needs to be initialized.
The memory initialization is required in the cases mentioned below.
When an error has occurred, the error messages such as “Screen data cor-
rupted” will be displayed. For the error messages displayed on the screen, refer
to 6-2 Responding to Displayed Error Messages (page 249).
S Initializing the screen data memory will erase entire screen data registered in
S If there is no system program installed, or it is corrupted, it must be installed (or
• Selecting “Quit” in the System Menu.
• The screen (touch switches) is not pressed for over 10 seconds.
• When the NT30/30C is used for the first time or when an error message indicat-
• When the NT30/30C has made a buzzer sound and the screen has disap-
Quit
Transmit Mode
Maintenance Mode The Maintenance Mode menu will be displayed to allow the
[ MAINTENANCE MENU ]
→ Use the “Maintenance Mode” -- “Init. Memory” in the System Menu.
→ Use the NT30/30C DIP switch SW2 pin 4 (Screen data forced initialize ef-
ing that the screen data is ruined etc. when the NT30/30C is started.
peared during the start-up or operation.
the NT30/30C. Make sure that there are backup copies of the screen data on
floppy disks before starting the initialization.
re-installed). For details on the system program installation method, refer to
2-4 Installing the System Program (page 22).
Display History
Init. Memory
PT Settings
Menu Item
fective/ineffective).
I/O Check
Quit
The System Menu screen is cleared and the NT30/30C will
return to the RUN mode.
The Transmit Mode screen will be displayed to allow the trans-
mission of the screen data between the NT30/30C and the
NT-series Support Tool. For the transmission of the screen
data, refer to 3-6 Registering the Screen Data (page 89).
maintenance of the NT30/30C system.
Memory Switch
Function
Section
3-4