NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 34

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2-4
22
Installing the System Program
NT30-ZS3PC-EV1
NT30-ZS3DV-EV1
NT-ZJCMX-EV4
Installing the System Program
Model Number
Reference
Reference
S Communication Conditions
S Recommended Connecting Cable
To make a connector cable, refer to the appendix Connecting Cable Specifica-
tions (page 281).
With the NT30/NT30C, the system program is not fixed and can be installed (or
re-installed). This means that the system program can be easily replaced when
grading up or changing the system configuration.
The following software is used to install the system program.
S System Installer
A simple explanation of the system program installation method is given here.
For a detailed explanation about setting up System Installer on a computer and
System Installer operations, refer to the manual provided with the System
Installer.
S Installing the System Program
(1) Initialized the NT30/NT30C
S If the system program is erased, it will become completely impossible to use
S The system program that is included in the NT30-ZS3jj-EV1 is installed in
S All of the system programs and System Installers required for the
Communication conditions are set when the NT-series Support Tool is started.
Use the cables indicated below.
Install the system program onto the NT30/NT30C using the following procedure.
the NT30/NT30C without reinstalling the system program. Before erasing the
system program, confirm that the System Installer and the system program
are at hand. Screen data and memory switch settings, however, will be saved.
the NT30/NT30C at the time of delivery.
NT30/NT30C are provided with the NT-series Support Tool for Windows
(Ver. 4).
CV500-CN228 (length: 2 m), made by OMRON
(D-sub, 9-pin, male ↔ D-sub, 25-pin, male)
XW2Z-S001 (conversion cable), made by OMRON
(D-sub, 25-pin, female ↔ Half-pitch, 14-pin, male, used together with the
CV500-CN228)
XW2Z-S002 (length: 2 m), made by OMRON
(D-sub, 9-pin, male ↔ D-sub, 9-pin, female, for IBM PC/AT or compatible
computer)
If another system program is already installed, erase that system program
first.
With the power supply to the NT30/NT30C turned OFF, turn ON DIP switch
(SW2) pin 7 and then turn ON the power supply. When the confirmation mes-
sage is displayed, execute erasing the system program
Host Link
NT Link (1:1)
NT Link (1:1)
Host Link
NT Link (1:1)
Communications Method
Installed in the NT30-ST131(B)-EV1/
NT30C-ST141(B)-EV1 at the time of
NT30C-ST141(B)-EV1 at the time of
delivery.
For Windows
Remarks
Section
2-4