DSPIC33EP512MU810T-I/PT Microchip Technology, DSPIC33EP512MU810T-I/PT Datasheet - Page 357

• Manufacturer Part Number: DSPIC33EP512MU810T-I/PT
• Description: 100 PINS, 512KB Flash, 52KB RAM, 60 MHz, USB, 2xCAN, 15 DMA 100 TQFP 12x12x1mm T
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33EPr

Specifications of DSPIC33EP512MU810T-I/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 60 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, QEI, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 83
• Program Memory Size: 512KB (170K x 24)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 24K x 16
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 32x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 22-1:
 2009-2011 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-8
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
R-0, HSC
dsPIC33EPXXXMU806/810/814 and PIC24EPXXXGU810/814
U-0
—
ID
Unimplemented: Read as ‘0’
ID: ID Pin State Indicator bit
1 = No cable is attached or a type B plug has been plugged into the USB receptacle
0 = A type A plug has been plugged into the USB receptacle
Unimplemented: Read as ‘0’
LSTATE: Line State Stable Indicator bit
1 = The USB line state (as defined by SE0 and JSTATE) has been stable for the previous 1 ms
0 = The USB line state has NOT been stable for the previous 1 ms
Unimplemented: Read as ‘0’
SESVD: Session Valid Indicator bit
1 = The Vbus voltage is above Va_sess_vld (as defined in the USB OTG Specification) on the A or B
0 = The Vbus voltage is below Va_sess_vld on the A or B device
SESEND: B-Session End Indicator bit
1 = The Vbus voltage is below Vb_sess_end (as defined in the USB OTG Specification) on the B device
0 = The Vbus voltage is above Vb_sess_end on the B device
Unimplemented: Read as ‘0’
VBUSVD: A-Vbus Valid Indicator bit
1 = The Vbus voltage is above Va_vbus_vld (as defined in the USB OTG Specification) on the A device
0 = The Vbus voltage is below Va_vbus_vld on the A device
device
U-0
U-0
—
—
UxOTGSTAT: USB OTG STATUS REGISTER
U = Unimplemented bit, read as ‘0’
W = Writable bit
‘1’ = Bit is set
R-0, HSC
LSTATE
U-0
—
U-0
U-0
—
—
Preliminary
HSC = Hardware Settable/Clearable bit
‘0’ = Bit is cleared
R-0, HSC
SESVD
U-0
—
R-0, HSC
SESEND
U-0
—
x = Bit is unknown
U-0
U-0
—
—
DS70616E-page 357
R-0, HSC
VBUSVD
U-0
—
bit 8
bit 0