LAN9311I-NZW Standard Microsystems (SMSC), LAN9311I-NZW Datasheet - Page 147

• Manufacturer Part Number: LAN9311I-NZW
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LAN9311I-NZW

• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: No
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Operating Temperature Classification: Industrial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Compliant

Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
SMSC LAN9311/LAN9311i
EECLK
10.2.3.3
10.2.3.4
EEDO
EECS
EEDI
EECLK
EEDO
EECS
EEDI
ERAL (Erase All)
If erase/write operations are enabled in the EEPROM, this command will initiate a bulk erase of the
entire EEPROM. The EPC_TIMEOUT bit of the
EEPROM does not respond within 30mS.
EWDS (Erase/Write Disable)
After this command is issued, the EEPROM will ignore erase and write commands. To re-enable
erase/write operations, the EWEN command must be issued.
1
0
1
0
Figure 10.9 EEPROM EWDS Cycle
Figure 10.8 EEPROM ERAL Cycle
0
1
DATASHEET
0
0
147
0
EEPROM Command Register (E2P_CMD)
0
Revision 1.7 (06-29-10)
is set if the