LAN9311I-NZW Standard Microsystems (SMSC), LAN9311I-NZW Datasheet - Page 387

• Manufacturer Part Number: LAN9311I-NZW
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LAN9311I-NZW

• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: No
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Operating Temperature Classification: Industrial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Compliant

Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
SMSC LAN9311/LAN9311i
14.5.3.18
BITS
31:3
2:0
RESERVED
Admit Only VLAN
When set, untagged and priority tagged packets are filtered.
The VLAN Enable bit in the
Register (SWE_GLOBAL_INGRSS_CFG)
have an affect.
There is one enable bit per ingress port. Bits 2,1,0 correspond to switch
ports 2,1,0 respectively.
Switch Engine Admit Only VLAN Register (SWE_ADMT_ONLY_VLAN)
This register is used to configure the per port ingress rule for allowing only VLAN tagged packets.
Register #:
Switch Engine Global Ingress Configuration
1842h
DESCRIPTION
DATASHEET
needs to be set for these bits to
387
Size:
32 bits
TYPE
R/W
RO
Revision 1.7 (06-29-10)
DEFAULT
000b
-