LAN9311I-NZW Standard Microsystems (SMSC), LAN9311I-NZW Datasheet - Page 184

• Manufacturer Part Number: LAN9311I-NZW
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LAN9311I-NZW

• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: No
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Operating Temperature Classification: Industrial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Compliant

Revision 1.7 (06-29-10)
14.2.2.3
BITS
30:0
31
RX Data FIFO Fast Forward (RX_FFWD)
Writing a 1 to this bit causes the RX Data FIFO to fast-forward to the start
of the next frame. This bit will remain high until the RX Data FIFO fast-
forward operation has completed. No reads should be issued to the RX Data
FIFO while this bit is high.
Note:
RESERVED
Receive Datapath Control Register (RX_DP_CTRL)
This register is used to discard unwanted receive frames.
Please refer to section
Forward," on page 135
of RX_FFWD.
Offset:
078h
DESCRIPTION
Section 9.9.1.1, "Receive Data FIFO Fast
for detailed information regarding the use
DATASHEET
184
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Size:
32 bits
TYPE
R/W
SMSC LAN9311/LAN9311i
RO
SC
DEFAULT
Datasheet
0h
-