LAN9311I-NZW Standard Microsystems (SMSC), LAN9311I-NZW Datasheet - Page 54

• Manufacturer Part Number: LAN9311I-NZW
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LAN9311I-NZW

• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: No
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Operating Temperature Classification: Industrial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Compliant

Revision 1.7 (06-29-10)
5.2.8
5.2.9
Software Interrupt
A general purpose software interrupt is provided in the top level
and
(INT_STS)
This interrupt provides an easy way for software to generate an interrupt, and is designed for general
software usage.
Device Ready Interrupt
A device ready interrupt is provided in the top-level
Enable Register
indicates that the LAN9311/LAN9311i is ready to be accessed after a power-up or reset condition.
Writing a 1 to this bit in the
In order for a device ready interrupt event to trigger the external IRQ interrupt pin, bit 30 of the
Enable Register (INT_EN)
Interrupt Configuration Register
Interrupt Enable Register
is generated when SW_INT_EN (bit 31) of the
(INT_EN). The READY interrupt (bit 30) of the
must be set, and IRQ output must be enabled via bit 8 (IRQ_EN) of the
Interrupt Status Register (INT_STS)
(INT_EN). The SW_INT interrupt (bit 31) of the
(IRQ_CFG).
DATASHEET
54
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Interrupt Status Register (INT_STS)
Interrupt Enable Register (INT_EN)
will clear it.
Interrupt Status Register (INT_STS)
Interrupt Status Register (INT_STS)
Interrupt Status Register
SMSC LAN9311/LAN9311i
and
Datasheet
Interrupt
Interrupt
is set.