PCI-BOARD/S25 Altera, PCI-BOARD/S25 Datasheet - Page 26

• Manufacturer Part Number: PCI-BOARD/S25
• Manufacturer: Altera

Specifications of PCI-BOARD/S25

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Stratix PCI Development Board Data Sheet
Debugging
Interfaces
Figure 6. JTAG Chain
26
JTAG Connector
TDO
TDI
f
JTAG Bypass
Refer to the Nios Development Board, Stratix Edition Data Sheet for details
about the Expansion Prototype Card (PROTO1) interface.
10/100 Ethernet
U11 is an SMSC LAN91C111 10/100 Ethernet MAC/Phy. RJ1 is an RJ-45
connector with integrated magnetics and activity LEDs.
RS-232 Serial Interface
J7 is a DB-9 connector wired as an RS-232 serial DTE device. U10 shifts the
RS-232 signals to LVTTL levels for connection to the Stratix device.
LCD Display Interface
J5 and J19 allow the Stratix PCI development board to accept an optional
LCD display. Compatible displays include the Optrex
T-51382D064J-FW-P-AA 6.4 display (not included with the kit).
1
The Stratix PCI development board has the debugging interfaces
described in the following sections.
JTAG
J1 provides access to the JTAG chain of the Stratix PCI development
board.
JTAG bypass jumper sets the chain to loop through the MAX
configuration controller and the Stratix device.
Jumper
1
3
5
2
4
6
Figure 6
The LCD Interface shares Stratix signals with the Mictor probe
debug interface. Only one of the interfaces can be used at a time.
shows the JTAG chain. The factory-default setting for the
TDI
Configuration
Controller
TDO
TDI
Stratix Device
TDO
Altera Corporation
TDI
HyperTransport
DUT Connector
TDO