dspic33fj128gp204 Microchip Technology Inc., dspic33fj128gp204 Datasheet - Page 303

• Manufacturer Part Number: dspic33fj128gp204
• Description: High-performance, 16-bit Digital Signal Controllers
• Manufacturer: Microchip Technology Inc.

27.5
dsPIC33FJ32GP302/304,
and dsPIC33FJ128GPX02/X04 devices implement a
JTAG interface, which supports boundary scan device
testing, as well as in-circuit programming. Detailed
information on this interface is provided in future
revisions of the document.
27.6
The dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/
X04 and dsPIC33FJ128GPX02/X04 devices can be
serially programmed while in the end application circuit.
This is done with two lines for clock and data and three
other lines for power, ground and the programming
sequence. Serial programming allows customers to
manufacture boards with unprogrammed devices and
then program the digital signal controller just before
shipping the product. Serial programming also allows
the most recent firmware or a custom firmware to be
programmed. Refer to the “dsPIC33F/PIC24H Flash
Programming Specification” (DS70152) for details
about In-Circuit Serial Programming (ICSP).
Any of the three pairs of programming clock/data pins
can be used:
• PGEC1 and PGED1
• PGEC2 and PGED2
• PGEC3 and PGED3
27.7
When MPLAB
circuit debugging functionality is enabled. This function
allows simple debugging functions when used with
MPLAB IDE. Debugging functionality is controlled
through the PGECx (Emulation/Debug Clock) and
PGEDx (Emulation/Debug Data) pin functions.
Any of the three pairs of debugging clock/data pins can
be used:
• PGEC1 and PGED1
• PGEC2 and PGED2
• PGEC3 and PGED3
To use the in-circuit debugger function of the device,
the design must implement ICSP connections to
MCLR, V
PGEDx pin pairs. In addition, when the feature is
enabled, some of the resources are not available for
general use. These resources include the first 80 bytes
of data RAM and two I/O pins.
© 2009 Microchip Technology Inc.
Note:
JTAG Interface
In-Circuit Debugger
DD
In-Circuit Serial Programming
Refer to Section 24. “Programming and
Diagnostics”
“dsPIC33F Family Reference Manual” for
further
configuration and operation of the JTAG
interface.
, V
®
SS
ICD 2 is selected as a debugger, the in-
, PGC, PGD and the PGECx and
information
dsPIC33FJ64GPX02/X04
(DS70207)
on
of
usage,
the
Preliminary
27.8
The
dsPIC33FJ128GPX02/X04 devices offer advanced
implementation of CodeGuard Security that supports
BS, SS and GS while, the dsPIC33FJ32GP302/304
devices offer the intermediate level of CodeGuard
Security that supports only BS and GS. CodeGuard
Security enables multiple parties to securely share
resources (memory, interrupts and peripherals) on a
single chip. This feature helps protect individual
Intellectual Property in collaborative system designs.
When coupled with software encryption libraries,
CodeGuard Security can be used to securely update
Flash even when multiple IPs reside on the single chip.
The code protection features vary depending on the
actual dsPIC33F implemented. The following sections
provide an overview of these features.
Secure segment and RAM protection is implemented
on
dsPIC33FJ128GPX02/X04
dsPIC33FJ32GP302/304 devices do not support
secure segment and RAM protection.
Note:
the
Code Protection and
CodeGuard™ Security
Refer to Section 23. “CodeGuard™
Security” (DS70199) of the “dsPIC33F
Family Reference Manual” for further
information on usage, configuration and
operation of CodeGuard Security.
dsPIC33FJ64GPX02/X04
dsPIC33FJ64GPX02/X04
devices.
DS70292C-page 301
and
and
The