LSI53CF92A-64QFP LSI, LSI53CF92A-64QFP Datasheet - Page 102

• Manufacturer Part Number: LSI53CF92A-64QFP
• Manufacturer: LSI

Specifications of LSI53CF92A-64QFP

• Lead Free Status / RoHS Status: Supplier Unconfirmed

Table 5.7
Table 5.8
5-10
Sequence Step
Sequence Step
0 0 0
0 1 0
0 1 1
1 0 0
0 0 0
0 0 0
0 1 0
0 1 1
1 0 0
[2:0]
[2:0]
Initiator Select without ATN Sequence
Initiator Select with ATN Sequence
Interrupt Register
Interrupt Register
0 0 1 0 0 0 0 0
0 0 0 1 1 0 0 0
0 0 0 1 1 0 0 0
0 0 0 1 1 0 0 0
0 0 1 0 0 0 0 0
0 0 0 1 1 0 0 0
0 0 0 1 1 0 0 0
0 0 0 1 1 0 0 0
0 0 0 1 1 0 0 0
Table 5.7
Table 5.8
Command Set
Copyright © 1995–2002 by LSI Logic Corporation. All rights reserved.
[7:0]
[7:0]
lists the Initiator Select without ATN sequence.
lists the Initiator Select with ATN sequence.
Interpretation
Arbitration complete; selection time-out; disconnected.
Arbitration and selection complete; stopped because target
did not assert command phase.
Stopped during command transfer because target
prematurely changed phase.
Select sequence complete.
Interpretation
Arbitration complete; selection time-out; disconnected.
Arbitration and selection complete; stopped because target did
not assert Message Out phase; ATN/ still asserted by FSC.
Arbitration, selection, and Message out complete; sent one
message byte with ATN/ true, then released ATN/; stopped
because target did not assert Command phase after
message byte was sent.
Stopped during command transfer due to premature phase
change. Some CDB bytes may not have been sent; check
FlFO flags.
Selection with ATN Sequence complete. One message byte
and all command bytes have been sent.