HD64F3664FPV Renesas Electronics America, HD64F3664FPV Datasheet - Page 187

• Manufacturer Part Number: HD64F3664FPV
• Description: IC H8/3664 MCU FLASH 32K 64LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of HD64F3664FPV

• Core Size: 16-Bit
• Program Memory Size: 32KB (32K x 8)
• Oscillator Type: External
• Core Processor: H8/300H
• Speed: 16MHz
• Connectivity: I²C, SCI
• Peripherals: PWM, WDT
• Number Of I /o: 29
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 64-LQFP
• No. Of I/o's: 29
• Ram Memory Size: 2KB
• Cpu Speed: 16MHz
• No. Of Timers: 4
• Digital Ic Case Style: LQFP
• Supply Voltage: RoHS Compliant
• Controller Family/series: H8/300H
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

12.3.7
TCNT is a 16-bit readable/writable up-counter. The clock source is selected by bits CKS2 to
CKS0 in TCRW. TCNT can be cleared to H'0000 through a compare match with GRA by setting
the CCLR in TCRW to 1. When TCNT overflows (changes from H'FFFF to H'0000), the OVF
flag in TSRW is set to 1. If OVIE in TIERW is set to 1 at this time, an interrupt request is
generated. TCNT must always be read or written in 16-bit units; 8-bit access is not allowed.
TCNT is initialized to H'0000 by a reset.
12.3.8
Each general register is a 16-bit readable/writable register that can function as either an output-
compare register or an input-capture register. The function is selected by settings in TIOR0 and
TIOR1.
When a general register is used as an input-compare register, its value is constantly compared with
the TCNT value. When the two values match (a compare match), the corresponding flag (IMFA,
IMFB, IMFC, or IMFD) in TSRW is set to 1. An interrupt request is generated at this time, when
IMIEA, IMIEB, IMIEC, or IMIED is set to 1. Compare match output can be selected in TIOR.
When a general register is used as an input-capture register, an external input-capture signal is
detected and the current TCNT value is stored in the general register. The corresponding flag
(IMFA, IMFB, IMFC, or IMFD) in TSRW is set to 1. If the corresponding interrupt-enable bit
(IMIEA, IMIEB, IMIEC, or IMIED) in TSRW is set to 1 at this time, an interrupt request is
generated. The edge of the input-capture signal is selected in TIOR.
GRC and GRD can be used as buffer registers of GRA and GRB, respectively, by setting BUFEA
and BUFEB in TMRW.
For example, when GRA is set as an output-compare register and GRC is set as the buffer register
for GRA, the value in the buffer register GRC is sent to GRA whenever compare match A is
generated.
When GRA is set as an input-capture register and GRC is set as the buffer register for GRA, the
value in TCNT is transferred to GRA and the value in the buffer register GRC is transferred to
GRA whenever an input capture is generated.
GRA to GRD must be written or read in 16-bit units; 8-bit access is not allowed. GRA to GRD are
initialized to H'FFFF by a reset.
Timer Counter (TCNT)
General Registers A to D (GRA to GRD)
Rev. 5.00, 03/04, page 159 of 388