MC9S12P96CFT Freescale Semiconductor, MC9S12P96CFT Datasheet - Page 104

• Manufacturer Part Number: MC9S12P96CFT
• Description: MCU 16BIT 96K FLASH 48-QFN
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12P96CFT

• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: CAN, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 34
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 1.72 V ~ 5.5 V
• Data Converters: A/D 10x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-QFN Exposed Pad
• Processor Series: S12P
• Core: HCS12
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: KIT33812ECUEVME, DEMO9S12PFAME
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Port Integration Module (S12PPIMV1)
Port E pin PE[0] can be used for either general purpose input or as the level-sensitive XIRQ interrupt input.
XIRQ can be enabled by clearing the X-bit in the CPU condition code register. It is inhibited at reset so
this pin is initially configured as a high-impedance input with a pull-up.
2.4.3.4
This port is associated with TIM and PWM.
Port T pins PT[5:4,0] can be used for either general purpose I/O, or with the routed PWM or with the
channels of the standard Timer subsystem.
Port T pins PT[7:6,3:1] can be used for either general purpose I/O, or with the channels of the standard
Timer subsystem.
2.4.3.5
This port is associated with SCI.
Port S pins PS[1:0] can be used either for general purpose I/O, or with the SCI subsystem.
Port S pins PS[3:2] can be used for general purpose I/O.
2.4.3.6
This port is associated with CAN and SPI.
Port M pins PM[1:0] can be used for either general purpose I/O, or with the CAN subsystem.
Port M pins PM[5:2] can be used for general purpose I/O, or with the SPI subsystem.
2.4.3.7
This port is associated with the PWM.
Port P pins PP[7,5:0] can be used for either general purpose I/O with pin interrupt capability, or with the
PWM subsystem.
2.4.3.8
Port J pins PJ[7:6,2:0] can be used for general purpose I/O with pin-interrupt capability.
2.4.3.9
This port is associated with the ATD.
Port AD pins PAD[9:0] can be used for either general purpose I/O, or with the ATD subsystem.
104
Port T
Port S
Port M
Port P
Port J
Port AD
S12P-Family Reference Manual, Rev. 1.13
Freescale Semiconductor