HD64F3048F16 Renesas Electronics America, HD64F3048F16 Datasheet - Page 530

• Manufacturer Part Number: HD64F3048F16
• Description: IC H8 MCU FLASH 128K 100QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD64F3048F16

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-QFP
• Package: 100PQFP
• Family Name: H8
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 16|32 Bit
• Number Of Programmable I/os: 70
• Interface Type: SCI
• On-chip Adc: 8-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 13 Serial Communication Interface
Transmitting Serial Data (Synchronous Mode): Figure 13.16 shows a sample flowchart for
transmitting serial data and indicates the procedure to follow.
Rev. 3.00 Sep 27, 2006 page 502 of 872
REJ09B0325-0300
TDR and clear TDRE flag
Read TDRE flag in SSR
Read TEND flag in SSR
Clear TE bit to 0 in SCR
Write transmit data in
Start transmitting
transmitted?
to 0 in SSR
TDRE = 1?
TEND = 1?
Initialize
All data
End
Yes
Yes
Yes
Figure 13.16 Sample Flowchart for Serial Transmitting
No
No
No
1
2
3
1.
2.
3.
SCI initialization: the transmit data output function
of the TxD pin is selected automatically.
SCI status check and transmit data write: read SSR,
check that the TDRE flag is 1, then write transmit
data in TDR and clear the TDRE flag to 0.
To continue transmitting serial data: after checking
that the TDRE flag is 1, indicating that data can be
written, write data in TDR, then clear the TDRE flag
to 0. When the DMAC is activated by a transmit-
data-empty interrupt request (TXI) to write data in
TDR, the TDRE flag is checked and cleared
automatically.