CYIL2SM1300AA-GZDC Cypress Semiconductor Corp, CYIL2SM1300AA-GZDC Datasheet - Page 30

• Manufacturer Part Number: CYIL2SM1300AA-GZDC
• Description: IMAGE SENSOR CMOS LUPA-1300-3
• Manufacturer: Cypress Semiconductor Corp
• Type: CMOS Imagingr

Specifications of CYIL2SM1300AA-GZDC

• Package / Case: 168-PGA
• Pixel Size: 14µm x 14µm
• Active Pixel Array: 1280H x 1024V
• Frames Per Second: 500
• Voltage - Supply: 2.5V, 3.3V
• Operating Supply Voltage: 2.5 V
• Maximum Power Dissipation: 1350 mW
• Maximum Operating Temperature: + 70 C
• Supply Current: 80 mA
• Minimum Operating Temperature: 0 C
• Package: 168CuPGA
• Image Size: 1280x1024 Pixels
• Color Sensing: Monochrome
• Operating Temperature: 0 to 70 °C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

CYIL2SM1300AA
Reverse Scan
Reverse scanning is supported in the X and Y direction. Line 0 (first line on the output) is the top line in normal mode and the bottom
line in reverse scanning, as shown in
Figure
24. As a result, the line numbers always increment. When reverse scanning in X, the
operation is analogous. To enable reverse readout in X and Y, set the seqmode4[6:7] bits. In addition, the Y_start and X_start
addresses must be changed to the new starting address.
Figure 24. Normal and Reverse Scanning in Y
Multiple Windows
The sequencer supports the readout of four different windows, randomly positioned over the pixel array. The images are read out
sequentially. That is, window 1 is read out before window 2, even if both windows show some overlap. Next, windows 3 and 4 are
read out. Each window is treated as a frame and images are read out as shown in
Figure
26. Also, the sum of readout times of all
four windows should be less than or equal to the sum of reset time and integration time. (RTw1+RTw2+RTw3+RTw4) < (Reset time
+ Integration time). You can configure the number of windows used in the application (one to four).
Figure 25
shows how to configure
two windows spread over the image array.
Figure 25. Multiple Windows Read from the Same Pixel Array
Figure 26. Readout from Windows
FOT
FS
Window1
FE
ROT
FS
Window 2
FE
FOT
FS
Window 1
FE
ROT
FS
Window 2
FE
Frame 2
Frame 1
Document Number: 001-24599 Rev. *F
Page 30 of 43
[+] Feedback