8808A 120V Fluke Electronics, 8808A 120V Datasheet - Page 33

• Manufacturer Part Number: 8808A 120V
• Description: DMM 5.5 RES RS-232 INTERFACE
• Manufacturer: Fluke Electronics
• Type: Digital (DMM)r

Specifications of 8808A 120V

• Includes: Test Leads
• Style: Bench
• Display Digits: 5.5
• Display Type: VFD, Dual
• Display Count: 200000
• Function: Voltage, Current, Resistance, Frequency
• Functions, Extra: Continuity, dB, Diode Test
• Features: Hold, Min/Max, RS-232 Port
• Ranging: Auto/Manual
• Response: True RMS
• Lead Free Status / RoHS Status: Not applicable / RoHS non-compliant
• Other names: 614-1068

Cleaning the Meter
Fluke 45 Emulation
To prepare the Meter for rack mounting, remove the bail and remove the front and rear
protective boots. To remove a boot, stretch a corner then slide it off as shown in Figure 2-
5.
To install the Meter into the rack, refer to the instructions provided with the Rack Mount
Kit.
If the Meter requires cleaning, wipe it down with a cloth that is lightly dampened with
water or a mild detergent. Do not use aromatic hydrocarbons, alchohol, chlorinated
solvents, or methanol-based fluids when wiping down the Meter.
To switch the Meter to Fluke 45 emulation:
Press and hold Sand f for two seconds.
To avoid electric shock or damage to the Meter, never get water
inside the Meter.
To avoid damaging the Meter’s housing, do not apply solvents
to the Meter.
Figure 2-5. Boot Removal
XW Warning
W Caution
Preparing the Meter for Operation
Cleaning the Meter
eue22.eps
2
2-9