ACS8525AT Semtech, ACS8525AT Datasheet - Page 69

• Manufacturer Part Number: ACS8525AT
• Manufacturer: Semtech

Specifications of ACS8525AT

• Lead Free Status / RoHS Status: Compliant

Address (hex):
Address (hex):
Revision 1.00/September 2007 © Semtech Corp.
ADVANCED COMMS & SENSING
Register Name
Register Name
Bit No.
Bit No.
Bit 7
[7:0]
Bit 7
[7:0]
50
51
cnfg_upper_threshold_0
Description
upper_threshold_0_value
The Leaky Bucket operates on a 128 ms cycle. If,
during a cycle, it detects that an input has either
failed or has been erratic, then for each cycle in
which this occurs, the accumulator is incremented
by 1, and for each period of 1, 2, 4, or 8 cycles, as
programmed in Reg. 53 (cnfg_decay_rate_0), in
which this does not occur, the accumulator is
decremented by 1.
When the accumulator count reaches the value
programmed as the upper_threshold_0_value, the
Leaky Bucket raises an input inactivity alarm.
cnfg_lower_threshold_0
Description
lower_threshold_0_value
The Leaky Bucket operates on a 128 ms cycle. If,
during a cycle, it detects that an input has either
failed or has been erratic, then for each cycle in
which this occurs, the accumulator is incremented
by 1, and for each period of 1, 2, 4, or 8 cycles, as
programmed in Reg. 53 (cnfg_decay_rate_0), in
which this does not occur, the accumulator is
decremented by 1.
The lower_threshold_0_value is the value at which
the Leaky Bucket will reset an inactivity alarm.
Bit 6
Bit 6
lower_threshold_0_value (Activity alarm, Config. 0, Leaky Bucket - reset threshold)
upper_threshold_0_value (Activity alarm, Config. 0, Leaky Bucket - set threshold)
Bit 5
Bit 5
Description
Description
Bit 4
Bit 4
FINAL
Page 69
(R/W) Register to program the
activity alarm setting limit for
Leaky Bucket Configuration 0.
(R/W) Register to program the
activity alarm resetting limit for
Leaky Bucket Configuration 0.
Bit Value
Bit Value
Bit 3
Bit 3
-
-
Value Description
Value at which the Leaky Bucket will raise an
inactivity alarm.
Value Description
Value at which the Leaky Bucket will reset an
inactivity alarm.
Bit 2
Bit 2
ACS8525A LC/P
Default Value
Default Value
Bit 1
Bit 1
DATASHEET
www.semtech.com
0000 0110
0000 0100
Bit 0
Bit 0