PIC16F913-I/SP Microchip Technology Inc., PIC16F913-I/SP Datasheet - Page 27

• Manufacturer Part Number: PIC16F913-I/SP
• Description: 28 PIN, 7 KB FLASH, 352 RAM, 25 I/O
• Manufacturer: Microchip Technology Inc.

Specifications of PIC16F913-I/SP

• A/d Inputs: 5-Channel, 10-Bit
• Comparators: 2
• Cpu Speed: 5 MIPS
• Eeprom Memory: 256 Bytes
• Input Output: 25
• Interface: I2C/SPI/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 28-pin SPDIP
• Programmable Memory: 7K Bytes
• Ram Size: 256 Bytes
• Speed: 20 MHz
• Timers: 2-8-bit, 1-16-bit
• Voltage, Range: 2-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

2.2.2.5
The PIE2 register contains the interrupt enable bits, as
shown in Register 2-5.
REGISTER 2-5:
© 2005 Microchip Technology Inc.
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
PIE2 Register
PIE2 – PERIPHERAL INTERRUPT ENABLE REGISTER 2 (ADDRESS: 8Dh)
OSFIE: Oscillator Fail Interrupt Enable bit
1 = Enabled
0 = Disabled
C2IE: Comparator 2 Interrupt Enable bit
1 = Enables Comparator 2 interrupt
0 = Disables Comparator 2 interrupt
C1IE: Comparator 1 Interrupt Enable bit
1 = Enables Comparator 1 interrupt
0 = Disables Comparator 1 interrupt
LCDIE: LCD Module Interrupt Enable bit
1 = LCD interrupt is enabled
0 = LCD interrupt is disabled
Unimplemented: Read as ‘0’
LVDIE: Low Voltage Detect Interrupt Enable bit
1 = Enables LVD Interrupt
0 = Disables LVD Interrupt
Unimplemented: Read as ‘0’
CCP2IE: CCP2 Interrupt Enable bit (only available in 16F914/917)
1 = Enables the CCP2 interrupt
0 = Disables the CCP2 interrupt
Legend:
R = Readable bit
- n = Value at POR
bit 7
OSFIE
R/W-0
R/W-0
C2IE
R/W-0
C1IE
Preliminary
W = Writable bit
‘1’ = Bit is set
PIC16F917/916/914/913
LCDIE
R/W-0
Note:
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U-0
Bit PEIE (INTCON<6>) must be set to
enable any peripheral interrupt.
—
R/W-0
LVDIE
x = Bit is unknown
U-0
—
DS41250E-page 25
CCP2IE
R/W-0
bit 0