PSB2115FV1.2D Lantiq, PSB2115FV1.2D Datasheet - Page 252

• Manufacturer Part Number: PSB2115FV1.2D
• Manufacturer: Lantiq

Specifications of PSB2115FV1.2D

• Lead Free Status / Rohs Status: Supplier Unconfirmed

4.3.17
Value after reset: (not defined)
TEI1
TEI1 ... Terminal Endpoint Identifier
EA ... Address field Extension bit
This bit is set to “1” according to HDLC/LAPD.
In all message transfer modes except in transparent modes 2 and 3,
TEI1 is used by the IPAC for address recognition. In the case of a two-byte address field,
it contains the value of the first programmable Terminal Endpoint Identifier according to
the ISDN LAPD-protocol.
In the auto-mode with a two-byte address field, numbered frames with the address
SAPI1-TEI1 are handled autonomously by the IPAC according to the LAPD-protocol.
Note: If the value FF
In auto and non-auto-modes with one-byte address field, TEI1 is a command address,
according to X.25 LAPB.
4.3.18
TEI2
TEI2 ... Terminal Endpoint Identifier
EA ... Address field Extension bit
This bit is to be set to “1” according to HDLC/LAPD.
In all message transfer modes except in transparent modes 2 and 3, TEI2 is used by the
IPAC for address recognition. In the case of a two-byte address field, it contains the
value of the second programmable Terminal Endpoint Identifier according of the ISDN
LAPD-protocol.
In auto and non-auto-modes with one-byte address field, TEI2 is a response address,
according to X.25 LAPD.
Semiconductor Group
Value after reset: (not defined)
SAPI1-TEI1 (SAPI1-TEIG) are not handled autonomously by the IPAC.
TEI1 - TEI1 Register 1 (Write)
7
TEI2 - TEI2 Register (Write)
7
H
is programmed in TEI1, received numbered frames with address
TEI1
TEI2
252
Detailed Register Description
0
0
EA
EA
PSB 2115
PSF 2115
11.97
(A8)
(A9)