AT32UC3A4128 Atmel Corporation, AT32UC3A4128 Datasheet - Page 499

• Manufacturer Part Number: AT32UC3A4128
• Manufacturer: Atmel Corporation

Specifications of AT32UC3A4128

• Flash (kbytes): 128 Kbytes
• Pin Count: 100
• Max. Operating Frequency: 66 MHz
• Cpu: 32-bit AVR
• Hardware Qtouch Acquisition: No
• Usb Transceiver: 1
• Usb Speed: Hi-Speed
• Usb Interface: Device + OTG
• Spi: 6
• Twi (i2c): 2
• Uart: 4
• Sd / Emmc: 2
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 128
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 3.0 to 3.6
• Operating Voltage (vcc): 3.0 to 3.6
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 6
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

• IDLE: Master Interface is Idle
• CCOMP: Command Complete
• CRDY: Ready for More Commands
• TXRDY: THR Data Ready
• RXRDY: RHR Data Ready
32072G–11/2011
This bit is one when no command is in progress, and no command waiting to be issued.
Otherwise, this bit is cleared.
This bit is one when the current command has completed successfully.
This bit is zero if the command failed due to conditions such as a NAK receved from slave.
This bit is cleared by writing 1 to the corresponding bit in the Status Clear Register (SCR).
This bit is one when CMDR and/or NCMDR is ready to receive one or more commands.
This bit is cleared when this is no longer true.
This bit is one when THR is ready for one or more data bytes.
This bit is cleared when this is no longer true (i.e. THR is full or transmission has stopped).
This bit is one when RX data are ready to be read from RHR.
This bit is cleared when this is no longer true.
499