MBM29QM12DH Fujitsu Microelectronics, Inc., MBM29QM12DH Datasheet - Page 45

• Manufacturer Part Number: MBM29QM12DH
• Description: Page Mode Flash Memory 128m 8m X 16 Bit
• Manufacturer: Fujitsu Microelectronics, Inc.

44
MBM29QM12DH
*1 : Voltage is defined on the basis of V
*2 : Minimum DC voltage on input or I/O pins is 0.5 V. During voltage transitions, input or I/O pins may
*3 : Minimum DC input voltage on A
*4 : Minimum DC input voltage on WP/ACC pin is 0.5 V. During voltage transitions, WP/ACC pin may
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
* : Voltage is defined on the basis of V
Note : Operating ranges define those limits between which the proper device function is guaranteed.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
Storage Temperature
Ambient Temperature with Power Applied
Voltage with Respect to Ground All pins except A
OE, and RESET *
Power Supply Voltage *
A
WP/ACC *
Ambient Temperature
Power Supply Voltage
V
9
CCQ
, OE, and RESET *
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING CONDITIONS
undershoot V
V
20 ns.
RESET pins may undershoot V
and supply voltage (V
pins is 13.0 V which may overshoot to 14.0 V for periods of up to 20 ns.
undershoot V
Supply Voltage*
10.5 V which may overshoot to 12.0 V for periods of up to 20 ns when Vcc is applied.
CC
Parameter
0.5 V. During voltage transitions, input or I/O pins may overshoot to V
1,
*
4
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating conditionranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
SS
SS
1,
*
Parameter
2
to 2.0 V for periods of up to 20 ns. Maximum DC voltage on input or I/O pins is
to 2.0 V for periods of up to 20 ns. Maximum DC input voltage on WP/ACC pin is
1,
*
3
1
IN
Symbol
V
V
CC
V
T
CCQ
CC
) does not exceed 9.0 V. Maximum DC input voltage on A
A
SS
-60
9
, OE and RESET pins is 0.5 V. During voltage transitions, A
SS
to 2.0 V for periods of up to 20 ns. Voltage difference between input
MBM29QM12DH 60/70
MBM29QM12DH 60/70
MBM29QM12DH 60
MBM29QM12DH 70
SS
GND
GND
9
,
0 V.
0 V.
Part No.
V
Symbol
IN
Tstg
V
V
V
, V
T
ACC
CC
IN
A
OUT
Min
0.5
0.5
0.5
0.5
55
40
Rating
CC
Min
1.65
2.7
2.7
40
2.0 V for periods of up to
Value
V
CC
Max
13.0
10.5
125
4.0
85
0.5
9
, OE and RESET
Max
1.95
V
3.6
85
CC
9
, OE and
Unit
V
V
V
V
C
C
Unit
V
V
V
C