sc3200 Advanced Micro Devices, sc3200 Datasheet - Page 307

no-image

sc3200

Manufacturer Part Number
sc3200
Description
Geode-tm Sc3200 Processor
Manufacturer
Advanced Micro Devices
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
sc3200UCL-266
Manufacturer:
NS
Quantity:
5 510
Part Number:
sc3200UCL-266
Manufacturer:
NS/国半
Quantity:
20 000
Core Logic Module - USB Controller Registers - PCIUSB
AMD Geode™ SC3200 Processor Data Book
Note:
Offset 4Ch-4Fh
Note:
Offset 50h-53h
Note:
31:16
30:18
15:0
14:2
Bit
7:0
31
17
16
15
1
0
This register is only reset by a power-on reset (PCIRST#). It is written during system initialization to configure the Root Hub.
These bit should not be written during normal operation.
This register is only reset by a power-on reset (PCIRST#). It is written during system initialization to configure the Root Hub.
These bit should not be written during normal operation.
This register is reset by the UsbReset state.
Description
NumberDownstreamPorts (Read Only). USB supports three downstream ports.
PortPowerControlMask. Global-power switching. This field is only valid if NoPowerSwitching is cleared and Power-
SwitchingMode is set (individual port switching). When set, the port only responds to individual port power switching com-
mands (Set/ClearPortPower). When cleared, the port only responds to global power switching commands (Set/
ClearGlobalPower).
0: Device not removable.
1: Global-power mask.
Port Bit relationship - Unimplemented ports are reserved, read/write 0.
0 = Reserved
1 = Port 1
2 = Port 2
...
15 = Port 15
DeviceRemoveable. USB ports default to removable devices.
0: Device not removable.
1: Device removable.
Port Bit relationship
0 = Reserved
1 = Port 1
2 = Port 2
...
15 = Port 15
Unimplemented ports are reserved, read/write 0.
ClearRemoteWakeupEnable (Write Only). Writing a 1 to this bit clears DeviceRemoteWakeupEnable. Writing a 0 has no
effect.
Reserved. Read/Write 0s.
OverCurrentIndicatorChange. This bit is set when OverCurrentIndicator changes. Writing a 1 clears this bit. Writing a 0
has no effect.
Read: LocalPowerStatusChange. Not supported. Always read 0.
Write: SetGlobalPower. Write a 1 issues a SetGlobalPower command to the ports. Writing a 0 has no effect.
Read: DeviceRemoteWakeupEnable. This bit enables ports' ConnectStatusChange as a remote wakeup event.
0: Disabled.
1: Enabled.
Write: SetRemoteWakeupEnable. Writing a 1 sets DeviceRemoteWakeupEnable. Writing a 0 has no effect.
Reserved. Read/Write 0s.
OverCurrentIndicator. This bit reflects the state of the OVRCUR pin. This field is only valid if NoOverCurrentProtection
and OverCurrentProtectionMode are cleared.
0: No over-current condition.
1:Over-current condition.
Read: LocalPowerStatus. Not Supported. Always read 0.
Write: ClearGlobalPower. Writing a 1 issues a ClearGlobalPower command to the ports. Writing a 0 has no effect.
Table 6-42. USB_BAR+Memory Offset: USB Controller Registers (Continued)
HcRhDescriptorB Register (R/W)
HcRhStatus Register (R/W)
Revision 5.1
Reset Value = 00000000h
Reset Value = 00000000h
307

Related parts for sc3200