pcf8536 NXP Semiconductors, pcf8536 Datasheet - Page 9

• Manufacturer Part Number: pcf8536
• Description: Universal Lcd Driver For Low Multiplex Rates Including A 6 Channel Pwm Generator
• Manufacturer: NXP Semiconductors

NXP Semiconductors
PCF8536
Product data sheet
8.1.4.1 Backplane swapping
8.1.4 Command: mode-settings
Table 8.
[1]
[2]
Backplane swapping can be configured with the BPS bit (see
location of the backplane and the associated segment outputs from one side of the
PCF8536 to the other. Backplane swapping is sometimes desirable to aid with the routing
of PCBs that do not use multiple layers.
The BPS bit has to be set to the required value before enabling the display. Failure to do
so does not damage the PCF8536 or the display, however unexpected display content
may appear.
Bit
7 to 4
3
2
1
0
Default value.
See
Section
Symbol
-
BPS
INV
PD
E
Mode-settings - mode settings command bit description
8.1.4.2.
All information provided in this document is subject to legal disclaimers.
Universal LCD low multiplex driver with 6 channel PWM generator
Rev. 1 — 6 October 2011
Value
0101
0
1
0
1
1
0
0
1
[1]
[1][2]
[1]
[1]
Description
fixed value
backplane swapping
set inversion mode
set power mode
display switch
backplane configuration 0
backplane configuration 1
Driving scheme A: LCD line inversion mode
Driving scheme B: LCD frame inversion mode
power-down mode; backplane and segment
outputs are connected to V
oscillator is switched off
power-up mode
display disabled; backplane and segment
outputs are connected to V
display enabled
Table
8). It moves the
PCF8536
© NXP B.V. 2011. All rights reserved.
SS
SS
and the internal
9 of 74