MC9S12Q FREESCALE [Freescale Semiconductor, Inc], MC9S12Q Datasheet - Page 234

• Manufacturer Part Number: MC9S12Q
• Description: Microcontrollers
• Manufacturer: FREESCALE [Freescale Semiconductor, Inc]

Chapter 8 Analog-to-Digital Converter (ATD10B8C) Block Description
8.3.2.5
This register selects the conversion clock frequency, the length of the second phase of the sample time and
the resolution of the A/D conversion (i.e.: 8-bits or 10-bits). Writes to this register will abort current
conversion sequence but will not start a new sequence.
Read: Anytime
Write: Anytime
234
Module Base + 0x0004
SMP[1:0]
PRS[4:0}
SRES8
Reset
Field
6–5
4–0
7
W
R
SRES8
A/D Resolution Select — This bit selects the resolution of A/D conversion results as either 8 or 10 bits. The A/D
converter has an accuracy of 10 bits; however, if low resolution is required, the conversion can be speeded up
by selecting 8-bit resolution.
0 10-bit resolution
1 8-bit resolution
Sample Time Select — These two bits select the length of the second phase of the sample time in units of ATD
conversion clock cycles. Note that the ATD conversion clock period is itself a function of the prescaler value (bits
PRS4-0). The sample time consists of two phases. The first phase is two ATD conversion clock cycles long and
transfers the sample quickly (via the buffer amplifier) onto the A/D machine’s storage node. The second phase
attaches the external analog signal directly to the storage node for final charging and high accuracy.
lists the lengths available for the second sample phase.
ATD Clock Prescaler — These 5 bits are the binary value prescaler value PRS. The ATD conversion clock
frequency is calculated as follows:
Note: The maximum ATD conversion clock frequency is half the Bus Clock. The default (after reset) prescaler
ATD Control Register 4 (ATDCTL4)
0
7
value is 5 which results in a default ATD conversion clock frequency that is Bus Clock divided by 12.
Table 8-8
ATDclock
SMP1
0
0
1
1
SMP1
0
6
illustrates the divide-by operation and the appropriate range of the Bus Clock.
=
Figure 8-7. ATD Control Register 4 (ATDCTL4)
----------------------------- -
BusClock
PRS
Table 8-6. ATDCTL4 Field Descriptions
SMP0
SMP0
+
0
1
0
1
Table 8-7. Sample Time Select
0
1
5
0.5
MC9S12Q128
PRS4
Rev 1.09
0
4
Length of 2nd Phase of Sample Time
Description
16 A/D conversion clock periods
2 A/D conversion clock periods
4 A/D conversion clock periods
8 A/D conversion clock periods
PRS3
0
3
PRS2
1
2
Freescale Semiconductor
PRS1
0
1
Table 8-7
PRS0
1
0