HD6412350 Hitachi, HD6412350 Datasheet - Page 558

• Manufacturer Part Number: HD6412350
• Description: (HD6412350 / HD6432351) 16-BIT MICROCONTROLLER
• Manufacturer: Hitachi

Bit 3—Stop Bit Length (STOP): Selects 1 or 2 bits as the stop bit length in asynchronous mode.
The STOP bits setting is only valid in asynchronous mode. If clocked synchronous mode is set the
STOP bit setting is invalid since stop bits are not added.
Bit 3
STOP
0
1
In reception, only the first stop bit is checked, regardless of the STOP bit setting. If the second
stop bit is 1, it is treated as a stop bit; if it is 0, it is treated as the start bit of the next transmit
character.
Bit 2—Multiprocessor Mode (MP): Selects multiprocessor format. When multiprocessor format
is selected, the PE bit and O/E bit parity settings are invalid. The MP bit setting is only valid in
asynchronous mode; it is invalid in clocked synchronous mode.
For details of the multiprocessor communication function, see section 13.3.3, Multiprocessor
Communication Function.
Bit 2
MP
0
1
Bits 1 and 0—Clock Select 1 and 0 (CKS1, CKS0): These bits select the clock source for the
baud rate generator. The clock source can be selected from ø, ø/4, ø/16, and ø/64, according to the
setting of bits CKS1 and CKS0.
For the relation between the clock source, the bit rate register setting, and the baud rate, see
section 13.2.8, Bit Rate Register.
Bit 1
CKS1
0
1
538
Description
1 stop bit: In transmission, a single 1 bit (stop bit) is added to the end of a transmit
character before it is sent.
2 stop bits: In transmission, two 1 bits (stop bits) are added to the end of a transmit
character before it is sent.
Description
Multiprocessor function disabled
Multiprocessor format selected
Bit 0
CKS0
0
1
0
1
Description
ø clock
ø/4 clock
ø/16 clock
ø/64 clock
(Initial value)
(Initial value)
(Initial value)