C8051F060-TB Silicon Laboratories Inc, C8051F060-TB Datasheet - Page 232

• Manufacturer Part Number: C8051F060-TB
• Description: BOARD PROTOTYPING W/C8051F060
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F060-TB

• Contents: Board
• Processor To Be Evaluated: C8051F06x
• Interface Type: USB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: C8051F060
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

C8051F060/1/2/3/4/5/6/7
232
Bit7-0:
Bit 4:
R/W
R/W
Bit7
Bit7
*
CAN0ADR: CAN Address Index Register.
The CAN0ADR Register is used to point the [CAN0DATH:CAN0DATL] to a desired CAN
Register. The desired CAN Register’s index number is moved into CAN0ADR. The
CAN0DAT Register can then read/write to and from the CAN Register.
Note: When the value of CAN0ADR is 0x08-0x12 and 0x20-2A (IF1 and IF2 registers), this
register will autoincrement by 1 upon a write to CAN0DATL. See
Autoincrement Feature” on page
All CAN registers’ functions/definitions are listed and described in the Bosch CAN
User’s Guide.
CANIF: CAN Interrupt Flag. Write = don’t care.
0: CAN interrupt has not occured.
1: CAN interrupt has occured and is active.
CANIF is controlled by the CAN controller and is cleared by hardware once all interrupt con-
ditions have been cleared in the CAN controller. See section 3.4.1 in the Bosch CAN User’s
Guide (page 24) for more information concerning CAN controller interrupts.
*All CAN registers’ functions/definitions are listed and described in the Bosch CAN
User’s Guide with the exception of the CANIF bit.
This register may be accessed directly in the CIP-51 SFR register space, or through the indi-
rect, index method (See Section
Access CAN
R/W
R/W
Bit6
Bit6
*
Figure 19.5. CAN0ADR: CAN Address Index Register
Registers” on page 229).
R/W
R/W
Bit5
Bit5
Figure 19.6. CAN0CN: CAN Control Register
*
CANIF
R/W
Bit4
Bit4
R
“19.2.5. Using CAN0ADR, CAN0DATH, and CANDATL To
229.
Rev. 1.2
R/W
R/W
Bit3
Bit3
*
R/W
R/W
Bit2
Bit2
*
R/W
R/W
Bit1
Bit1
*
Section “19.2.6. CAN0ADR
SFR Address:
SFR Address:
SFR Page:
SFR Page:
R/W
R/W
Bit0
Bit0
*
0xDA
1
0xF8
1
Reset Value
Reset Value
00000000