MC56F8367VPYE Freescale Semiconductor, MC56F8367VPYE Datasheet - Page 118

• Manufacturer Part Number: MC56F8367VPYE
• Description: IC DSP 16BIT 60MHZ 160-LQFP
• Manufacturer: Freescale Semiconductor
• Series: 56F8xxxr

Specifications of MC56F8367VPYE

• Core Processor: 56800
• Core Size: 16-Bit
• Speed: 60MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 76
• Program Memory Size: 544KB (272K x 16)
• Program Memory Type: FLASH
• Ram Size: 18K x 16
• Voltage - Supply (vcc/vdd): 2.25 V ~ 3.6 V
• Data Converters: A/D 16x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 160-LQFP
• Cpu Family: 56F8xxx
• Device Core Size: 16b
• Frequency (max): 60MHz
• Interface Type: CAN/SCI/SPI
• Total Internal Ram Size: 36KB
• # I/os (max): 76
• Number Of Timers - General Purpose: 4
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• On-chip Adc: 4(4-chx12-bit)
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 105C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 160
• Package Type: LQFP
• Data Bus Width: 16 bit
• Processor Series: MC56F83xx
• Core: 56800E
• Numeric And Arithmetic Format: Fixed-Point
• Device Million Instructions Per Second: 60 MIPs
• Maximum Clock Frequency: 60 MHz
• Number Of Programmable I/os: 76
• Data Ram Size: 36 KB
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: MC56F8367EVME
• Minimum Operating Temperature: - 40 C
• Package: 160LQFP
• Family Name: 56F8xxx
• Maximum Speed: 60 MHz
• Number Of Timers: 4
• For Use With: MC56F8367EVME - EVAL BOARD FOR MC56F83X
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Compliant

6.5.6.3
This bit controls the pull-up resistors on the CAN_RX pin.
6.5.6.4
This bit controls the pull-up resistors on the EMI_MODE pin.
6.5.6.5
This bit controls the pull-up resistors on the RESET pin.
6.5.6.6
This bit controls the pull-up resistors on the IRQA and IRQB pins.
6.5.6.7
This bit controls the pull-up resistors on the EXTBOOT pin.
Note:
6.5.6.8
This bit controls the pull-up resistors on the FAULTB0, FAULTB1, FAULTB2, and FAULTB3 pins.
6.5.6.9
This bit controls the pull-up resistors on the FAULTA0, FAULTA1, and FAULTA2 pins.
6.5.6.10
This bit field is reserved or not implemented. It is read as 0 and cannot be modified by writing.
6.5.6.11
This bit controls the pull-up resistors on the WR and RD pins.
6.5.6.12
This bit field is reserved or not implemented. It is read as 0 and cannot be modified by writing.
6.5.6.13
This bit controls the pull-up resistors on the TRST, TMS and TDI pins.
6.5.6.14
This bit field is reserved or not implemented. It is read as 0 and cannot be modified by writing.
6.5.7
The CLKO select register can be used to multiplex out any one of the clocks generated inside the clock
generation and SIM modules. The default value is SYS_CLK. All other clocks primarily muxed out are
for test purposes only, and are subject to significant phase shift at high frequencies.
118
In this package, this input pin is double-bonded with the adjacent V
changed to a 1 in order to reduce power consumption.
CLKO Select Register (SIM_CLKOSR)
CAN—Bit 13
EMI_MODE—Bit 12
RESET—Bit 11
IRQ—Bit 10
XBOOT—Bit 9
PWMB—Bit 8
PWMA0—Bit 7
Reserved—Bit 6
CTRL—Bit 5
Reserved—Bit 4
JTAG—Bit 3
Reserved—Bit 2–0
56F8367 Technical Data, Rev. 9
SS
pin and this bit should be
Freescale Semiconductor
Preliminary