R5F363AENFA#U0 Renesas Electronics America, R5F363AENFA#U0 Datasheet - Page 851

• Manufacturer Part Number: R5F363AENFA#U0
• Description: MCU 4KB FLASH 256/16K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: M16C/60/63r

Specifications of R5F363AENFA#U0

• Core Processor: M16C/60
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: EBI/EMI, I²C, SIO, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 20K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 26x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

M16C/63 Group
REJ09B0510-0100 Rev.1.00 Sep 15, 2009
Page 813 of 836
32.16 Notes on Timer B
32.16.1 Common Notes on Multiple Modes
32.16.2 Timer B (Timer Mode)
32.16.3 Timer B (Event Counter Mode)
32.16.1.1 Register Setting
32.16.2.1 Read from Timer
32.16.3.1 Read from Timer
The 80-pin package does not have the TB1IN pin. Do not use functions associated with this pin.
The timer is stopped after reset. Set the mode, count source, etc., using registers TBiMR, TBCS0 to
TBCS3, TBi, TCKDIVC0, PCLKR, PPWFS1, and PPWFS2 before setting the TBiS bit in the TABSR or
TBSR register to 1 (count started) (i = 0 to 5).
Always make sure registers TBiMR, TBCS0 to TBCS3, TCKDIVC0, PCLKR, PPWFS1, and PPWFS2
are modified while the TBiS bit is 0 (count stopped), regardless of whether after reset or not.
Note
While counting, the counter value can be read at any time by reading the TBi register. However,
FFFFh is read while reloading. When the counter is read before it starts counting and after a value is
set in the TBi register while not counting, the set value is read.
While counting, the counter value can be read at any time by reading the TBi register. However,
FFFFh is read while reloading. When the counter is read before it starts counting and after a value is
set in the TBi register while not counting, the set value is read.
32. Usage Notes