DSPIC30F6010A-20E/PT Microchip Technology, DSPIC30F6010A-20E/PT Datasheet - Page 166

• Manufacturer Part Number: DSPIC30F6010A-20E/PT
• Description: IC,DSP,16-BIT,CMOS,TQFP,80PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F6010A-20E/PT

• Rohs Compliant: YES
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Size: 144KB (48K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 80-TFQFP
• Package: 80TQFP
• Device Core: dsPIC
• Family Name: dsPIC30
• Maximum Speed: 20 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 68
• Interface Type: CAN/I2C/SPI/UART
• On-chip Adc: 16-chx10-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DM300019 - BOARD DEMO DSPICDEM 80L STARTERXLT80PT3 - SOCKET TRAN ICE 80MQFP/TQFPAC164320 - MODULE SKT MPLAB PM3 80TQFPAC30F007 - MODULE SKT FOR DSPIC30F 80TQFPDM300020 - BOARD DEV DSPICDEM MC1 MOTORCTRL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

dsPIC30F6010A/6015
Most single-word instructions are executed in a single
instruction cycle, unless a conditional test is true or the
program counter is changed as a result of the
instruction. In these cases, the execution takes two
instruction cycles with the additional instruction
cycle(s) executed as a NOP. Notable exceptions are the
BRA (unconditional/computed branch), indirect CALL/
GOTO, all table reads and writes and RETURN/RETFIE
instructions, which are single-word instructions, but
take two or three cycles. Certain instructions that
involve skipping over the subsequent instruction,
TABLE 22-1:
DS70150D-page 166
#text
(text)
[text]
{ }
<n:m>
.b
.d
.S
.w
Acc
AWB
bit4
C, DC, N, OV, Z
Expr
f
lit1
lit4
lit5
lit8
lit10
lit14
lit16
lit23
None
OA, OB, SA, SB
PC
Slit10
Slit16
Slit6
Field
SYMBOLS USED IN OPCODE DESCRIPTIONS
Means literal defined by “text”
Means “content of “text”
Means “the location addressed by text”
Optional field or operation
Register bit field
Byte mode selection
Double Word mode selection
Shadow register select
Word mode selection (default)
One of two accumulators {A, B}
Accumulator Write-Back Destination Address register ∈ {W13, [W13]+ = 2}
4-bit bit selection field (used in word addressed instructions) ∈ {0...15}
MCU Status bits: Carry, Digit Carry, Negative, Overflow, Zero
Absolute address, label or expression (resolved by the linker)
File register address ∈ {0x0000...0x1FFF}
1-bit unsigned literal ∈ {0,1}
4-bit unsigned literal ∈ {0...15}
5-bit unsigned literal ∈ {0...31}
8-bit unsigned literal ∈ {0...255}
10-bit unsigned literal ∈ {0...255} for Byte mode, {0:1023} for Word mode
14-bit unsigned literal ∈ {0...16384}
16-bit unsigned literal ∈ {0...65535}
23-bit unsigned literal ∈ {0...8388608}; LSB must be ‘0’
Field does not require an entry, may be blank
DSP Status bits: AccA Overflow, AccB Overflow, AccA Saturate, AccB Saturate
Program Counter
10-bit signed literal ∈ {-512...511}
16-bit signed literal ∈ {-32768...32767}
6-bit signed literal ∈ {-16...16}
require either two or three cycles if the skip is
performed, depending on whether the instruction being
skipped is a single-word or two-word instruction.
Moreover, double word moves require two cycles. The
double word instructions execute in two instruction
cycles.
Note:
Description
For more details on the instruction set,
refer to the “dsPIC30F/33F Programmers
Reference Manual” (DS70157).
© 2008 Microchip Technology Inc.