ADUC7129BSTZ126-RL Analog Devices Inc, ADUC7129BSTZ126-RL Datasheet - Page 3

• Manufacturer Part Number: ADUC7129BSTZ126-RL
• Description: IC DAS MCU ARM7 ADC/DDS 80-LQFP
• Manufacturer: Analog Devices Inc
• Series: MicroConverter® ADuC7xxxr

Specifications of ADUC7129BSTZ126-RL

• Core Size: 16/32-Bit
• Program Memory Size: 126KB (126K x 8)
• Core Processor: ARM7
• Speed: 41.78MHz
• Connectivity: EBI/EMI, I²C, SPI, UART/USART
• Peripherals: PLA, POR, PWM, PSM, Temp Sensor, WDT
• Number Of I /o: 38
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x12b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 80-LQFP
• Controller Family/series: (ARM7) ADUC
• No. Of I/o's: 40
• Cpu Speed: 41.78MHz
• No. Of Timers: 5
• Digital Ic Case Style: LQFP
• Embedded Interface Type: I2C, SPI, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: ADUC7129BSTZ126-RLTR

GENERAL DESCRIPTION
The ADuC7128/ADuC7129 are fully integrated, 1 MSPS, 12-bit
data acquisition systems incorporating a high performance, multi-
channel analog-to-digital converter (ADC), DDS with line
driver, 16-/32-bit MCU, and Flash/EE memory on a single chip.
The ADC consists of up to 14 single-ended inputs. The ADC
can operate in single-ended or differential input modes. The
ADC input voltage is 0 to V
temperature sensor, and voltage comparator complete the ADC
peripheral set.
The ADuC7128/ADuC7129 integrate a differential line driver
output. This line driver transmits a sine wave whose values are
calculated by an on-chip DDS or a voltage output determined
by the DACDAT MMR.
The devices operate from an on-chip oscillator and PLL, generating
an internal high frequency clock of 41.78 MHz. This clock is
routed through a programmable clock divider from which the
MCU core clock operating frequency is generated.
REF
. Low drift band gap reference,
Rev. 0 | Page 3 of 92
The microcontroller core is an ARM7TDMI®, 16-/32-bit
reduced instruction set computer (RISC), offering up to
41 MIPS peak performance. There are 126 kB of nonvolatile
Flash/EE provided on-chip, as well as 8 kB of SRAM. The
ARM7TDMI core views all memory and registers as a single
linear array.
On-chip factory firmware supports in-circuit serial download
via the UART serial interface port, and nonintrusive emulation
is also supported via the JTAG interface. These features are
incorporated into a low cost QuickStart™ development system
supporting this MicroConverter® family.
The parts operate from 3.0 V to 3.6 V and are specified over an
industrial temperature range of −40°C to +125°C. When operating
at 41.78 MHz, the power dissipation is 135 mW. The line driver
output, if enabled, consumes an additional 30 mW.
ADuC7128/ADuC7129