ADUC7129BSTZ126-RL Analog Devices Inc, ADUC7129BSTZ126-RL Datasheet - Page 76

• Manufacturer Part Number: ADUC7129BSTZ126-RL
• Description: IC DAS MCU ARM7 ADC/DDS 80-LQFP
• Manufacturer: Analog Devices Inc
• Series: MicroConverter® ADuC7xxxr

Specifications of ADUC7129BSTZ126-RL

• Core Size: 16/32-Bit
• Program Memory Size: 126KB (126K x 8)
• Core Processor: ARM7
• Speed: 41.78MHz
• Connectivity: EBI/EMI, I²C, SPI, UART/USART
• Peripherals: PLA, POR, PWM, PSM, Temp Sensor, WDT
• Number Of I /o: 38
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x12b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 80-LQFP
• Controller Family/series: (ARM7) ADUC
• No. Of I/o's: 40
• Cpu Speed: 41.78MHz
• No. Of Timers: 5
• Digital Ic Case Style: LQFP
• Embedded Interface Type: I2C, SPI, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: ADUC7129BSTZ126-RLTR

ADuC7128/ADuC7129
Table 111. T1CON MMR Bit Designations
Bit
31:18
17
16:12
11:9
8
7
6
5:4
3:0
Value
000
001
010
011
00
01
10
11
0000
0100
1000
1111
Description
Reserved. Should be set to 0 by the user.
Event Select Bit.
Event Select Range, 0 to 31. The events are as described in the introduction to the timers.
Clock Select.
Core Clock (Default).
32.768 kHz Oscillator.
P1.0.
P0.6.
Count Up.
Timer1 Enable Bit.
Timer1 Mode.
Format.
Binary (Default).
Reserved.
Hours:Minutes:Seconds:Hundredths: 23 Hours to 0 Hours.
Hours:Minutes:Seconds:Hundredths: 255 Hours to 0 Hours.
Prescaler.
Source Clock/1 (Default).
Source Clock/16.
Source Clock/256.
Source Clock/32768.
Set by user to enable time capture of an event.
Cleared by user to disable time capture of an event.
Set by user for Timer1 to count up.
Cleared by user for Timer1 to count down (default).
Set by user to enable Timer1.
Cleared by user to disable Timer1 (default).
Set by user to operate in periodic mode.
Cleared by user to operate in free-running mode (default).
Rev. 0 | Page 76 of 92