DF2378BVFQ35WV Renesas Electronics America, DF2378BVFQ35WV Datasheet - Page 953

• Manufacturer Part Number: DF2378BVFQ35WV
• Description: IC H8S/2378 MCU FLASH 144-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2378BVFQ35WV

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 35MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 97
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 6x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-QFP
• For Use With: EDK2378 - DEV EVAL KIT FOR H8S/2378
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

For details on the program processing procedure, see section 21.4.2, User Program Mode.
(a) Flash multipurpose address area parameter (FMPAR: general register ER1 of CPU)
This parameter stores the start address of the programming destination on the user MAT.
When the address in the area other than flash memory space is set, an error occurs.
The start address of the programming destination must be at the 128-byte boundary. If this
boundary condition is not satisfied, an error occurs. The error occurrence is indicated by the WA
bit (bit 1) in FPFR.
Bit
31 to 0
(b) Flash multipurpose data destination parameter (FMPDR: general register ER0 of CPU):
This parameter stores the start address in the area which stores the data to be programmed in the
user MAT. When the storage destination of the program data is in flash memory, an error occurs.
The error occurrence is indicated by the WD bit in FPFR.
Bit
31 to 0
When data to be programmed does not satisfy 128 bytes, the 128-byte program data must be
prepared by filling with the dummy code H'FF.
The start address of the area in which the prepared program data is stored must be stored in a
general register ER0. This parameter is called as FMPDR (flash multipurpose data destination
area parameter).
Bit
Name
MOA31 to
MOA0
Bit
Name
MOD31 to
MOD0
Initial
Value
⎯
Initial
Value
⎯
R/W
R/W
R/W
R/W
Description
Store the start address of the programming destination
on the user MAT. The consecutive 128-byte
programming is executed starting from the specified start
address of the user MAT. Therefore, the specified
programming start address becomes a 128-byte
boundary and MOA6 to MOA0 are always 0.
Description
Store the start address of the area which stores the
program data for the user MAT. The consecutive 128-
byte data is programmed to the user MAT starting from
the specified start address.
Section 21 Flash Memory (0.18-μm F-ZTAT Version)
Rev.7.00 Mar. 18, 2009 page 885 of 1136
REJ09B0109-0700