UPD78F1211MC-GAA-AX Renesas Electronics America, UPD78F1211MC-GAA-AX Datasheet - Page 407

• Manufacturer Part Number: UPD78F1211MC-GAA-AX
• Description: MCU 16BIT 78K0R/LX3 38-SSOP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Ix3r

Specifications of UPD78F1211MC-GAA-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 27
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Remark m = 02 to 07
Operation
stop
TAUS
stop
The TT00 (master) and TTm (slaves 2 to 7) bits are set
to 1 at the same time.
The TOEm bits of slave channels 2 to 7 are cleared to 0
and value is set to the TOm bit.
To hold the TOm pin output level
When holding the TOm pin output level is not necessary
The TAU0EN and TAUOPEN bits of the PER2 register
are cleared to 0.
The TT00 and TTm bits automatically return to 0
because they are trigger bits.
Clears the TOm bit to 0 after the value to be held is
set to the port register.
Switches the port mode register to input mode.
Figure 7-27. Operation Procedure When 6-Phase PWM Output Function Is Used (2/2)
Software Operation
CHAPTER 7 INVERTER CONTROL FUNCTIONS
User’s Manual U19678EJ1V1UD
TE00, TEm = 0, and count operation stops.
The TOm pin outputs the TOm set level.
The TOm pin output level is held by port function.
The TOm pin output level goes into Hi-Z output state.
Power-off status
TCR00 and TCRm hold count value and stops.
The TOm output is not initialized but holds current status.
All circuits are initialized and SFR of each channel is also
initialized.
(The TO00 and TOm bits are cleared to 0 and the TO00
and TOm pins are set to port mode.)
Hardware Status
405