AT91SAM7S64C-AU Atmel, AT91SAM7S64C-AU Datasheet - Page 481

• Manufacturer Part Number: AT91SAM7S64C-AU
• Description: IC ARM7 MCU 32BIT 64K 64LQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7S64C-AU

• Package / Case: 64-LQFP
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 55MHz
• Number Of I /o: 32
• Core Processor: ARM7
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Program Memory Size: 64KB (64K x 8)
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Connectivity: I²C, SPI, SSC, UART/USART, USB
• Core Size: 16/32-Bit
• Core: ARM7TDMI
• Package: 64LQFP
• Device Core: ARM7TDMI
• Family Name: AT91
• Maximum Speed: 55 MHz
• Operating Supply Voltage: 1.8|3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 32
• Interface Type: SPI/TWI/USART/USB
• On-chip Adc: 8-chx10-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: AT91SAM7S64B-AU::AT91SAM7S64B-AU

6175K–ATARM–30-Aug-10
Figure 34-4. Non Overlapped Center Aligned Waveforms
Note:
• the waveform duty cycle. This channel parameter is defined in the CDTY field of the
• the waveform polarity. At the beginning of the period, the signal can be at high or low level.
• the waveform alignment. The output waveform can be left or center aligned. Center aligned
By using a Master Clock divided by one of both DIVA or DIVB divider, the formula becomes,
respectively:
(
-------------------------------------------- -
If the waveform is center aligned then the output waveform period depends on the counter
source clock and can be calculated:
By using the Master Clock (MCK) divided by an X given prescaler value
(with X being 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, or 1024). The resulting period formula will
be:
(
--------------------------------------------
By using a Master Clock divided by one of both DIVA or DIVB divider, the formula becomes,
respectively:
(
-------------------------------------------------------
PWM_CDTYx register.
If the waveform is left aligned then:
If the waveform is center aligned, then:
This property is defined in the CPOL field of the PWM_CMRx register. By default the signal
starts by a low level.
waveforms can be used to generate non overlapped waveforms. This property is defined in
the CALG field of the PWM_CMRx register. The default mode is left aligned.
CRPD
2
2
PWM0
PWM1
duty cycle
duty cycle
×
×
X
CPRD
See
MCK
MCK
×
MCK
×
CPRD
Figure 34-5 on page 483
DIVA
×
=
=
DIVA
No overlap
)
)
(
------------------------------------------------------------------------------------------------------------- -
(
-------------------------------------------------------------------------------------------------------------------------------- -
period 1
(
or
period
)
(
------------------------------------------------ -
CRPD
or
Period
(
-------------------------------------------------------
–
2
⁄
MCK
×
×
2
⁄
CPRD
) 1
DIVAB
fchannel_x_clock
–
MCK
for a detailed description of center aligned waveforms.
AT91SAM7S Series Preliminary
period
⁄
(
×
period
)
fchannel_x_clock
DIVB
)
⁄
2
)
×
CDTY
×
CDTY
)
) )
481