XR17V358IB176-F Exar Corporation, XR17V358IB176-F Datasheet - Page 25

• Manufacturer Part Number: XR17V358IB176-F
• Description: IC UART PCIE OCTAL 176FPBGA
• Manufacturer: Exar Corporation

Specifications of XR17V358IB176-F

• Number Of Channels: 1, UART
• Package / Case: 176-LFBGA
• Features: *
• Fifo's: 256 Byte
• Protocol: RS485
• Voltage - Supply: 1.2V, 3.3V
• With Auto Flow Control: Yes
• With Irda Encoder/decoder: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• Mounting Type: Surface Mount
• Data Rate: 25 Mbps
• Supply Current: 120 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Operating Supply Voltage: 3.3 V
• No. Of Channels: 8
• Uart Features: Tx/Rx FIFO Counters
• Supply Voltage Range: 3V To 3.6V
• Operating Temperature Range: -40°C To +85°C
• Digital Ic Case Style: BGA
• No. Of Pins: 176
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 1016-1296 - EVAL BOARD FOR XR17V358-E81016-1295 - EVAL BOARD FOR XR17V358-E41016-1293 - EVAL BOARD FOR XR17V358
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1016-1294

REV. 1.0.2
8X sampling rate. Transmit and receive data rates will double by selecting 8X. If using the 4XMODE, the
corresponding bit in this register should be logic 0
Each bit selects 4X or 16X sampling rate for that UART channel. The 4XMODE register is accessible from the
Device Configuration Registers in all UART channels but the UART channel can only control the bit for that
channel. For example, bit [0] is channel 0 and can only be controlled by channel 0. All other bits are read-only
in channel 0. Logic 0 (default) selects normal 16X sampling (and 8XMODE = 0x00) with logic one selects 4X
sampling rate. Transmit and receive data rates will quadruple by selecting 4X. If using the 8XMODE, the
corresponding bit in this register should be logic 0
RESET [23:16] (default 0x00)
The 8-bit RESET register provides the software with the ability to reset the UART(s) when there is a need. The
RESET register is accessible from the Device Configuration Registers in all UART channels but the UART
channel can only control the bit for that channel. For example, writing 0xFF to the RESET register in channel 0
will only reset channel 0. Each bit is self-clearing after it is written a logic 1 to perform a reset to that channel.
All registers in that channel will be reset to the default condition, see
1.4.4
1.4.5
4XMODE [15:8] (default 0x00)
SLEEP [31:24] (default 0x00)
Ch-7
Bit-7 Bit-6 Bit-5 Bit-4 Bit-3 Bit-2 Bit-1 Bit-0
Ch-7
Bit-7 Bit-6 Bit-5 Bit-4 Bit-3 Bit-2 Bit-1 Bit-0
Bit-7 Bit-6 Bit-5 Bit-4 Bit-3 Bit-2 Bit-1 Bit-0
Individual UART Channel 4X Clock Mode Enable
Ch-7
Bit-7 Bit-6 Bit-5 Bit-4 Bit-3 Bit-2 Bit-1 Bit-0
Ch-7
Individual UART Channel 8X Clock Mode Enable
Ch-6
Ch-6
Individual UART Channel Reset Enable
Ch-6
Ch-6
Individual UART Channel Sleep Enable
4XMODE Register
Ch-5 Ch-4 Ch-3 Ch-2 Ch-1 Ch-0
Ch-5 Ch-4 Ch-3 Ch-2 Ch-1 Ch-0
Ch-5 Ch-4 Ch-3 Ch-2 Ch-1 Ch-0
Ch-5 Ch-4 Ch-3 Ch-2 Ch-1 Ch-0
8XMODE Register
RESET Register
SLEEP Register
25
HIGH PERFORMANCE OCTAL PCI EXPRESS UART
Table 21
for details. .
XR17V358