KSZ8893MBLI Micrel Inc, KSZ8893MBLI Datasheet - Page 101

• Manufacturer Part Number: KSZ8893MBLI
• Description: 2+1 Port 10/100 Switch W/ Tranceivers & Frame Buffers ( )
• Manufacturer: Micrel Inc

Specifications of KSZ8893MBLI

• Controller Type: Ethernet Switch Controller
• Interface: MII, RMII, SNI
• Voltage - Supply: 3.1 V ~ 3.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 100-LFBGA
• Number Of Primary Switch Ports: 3
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Power Supply Type: Analog/Digital
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Industrial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Supply: -
• Lead Free Status / RoHS Status: Not Compliant, Lead free / RoHS Compliant
• Other names: 576-3575

Notes:
1. Exceeding the absolute maximum rating may damage the device. Stresses greater than those listed in the table above may cause
2. The device is not guaranteed to function outside its operating rating. Unused inputs must always be tied to an appropriate logic voltage
3. No (HS) heat spreader in this package. The thermal junction to ambient (θ
4. Specification for packaged product only. A single port’s transformer consumes an additional 45mA at 3.3V for 100BASE-T and 70mA at
February 2010
permanent
damage to the device. Operation of the device at these or any other conditions above those specified in the operating sections of this
specification
is not implied. Maximum conditions for extended periods may affect reliability. Unused inputs must always be tied to an appropriate logic
voltage
level.
3.3V for 10BASE-T.
level (Ground to V
0m/s.
DD
)
101
JA
) and the thermal junction to case (θ
JC
) are under air velocity
M9999-021110-1.6