LAN9311-NZW Standard Microsystems (SMSC), LAN9311-NZW Datasheet - Page 330

• Manufacturer Part Number: LAN9311-NZW
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LAN9311-NZW

• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: No
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Compliant

Revision 1.7 (06-29-10)
14.5.2.7
BITS
31:0
RX 256 to 511 Bytes
Count of packets (including bad packets) that have between 256 and 511
bytes.
Note:
Port x MAC Receive 256 to 511 Byte Count Register (MAC_RX_256_TO_511_CNT_x)
This register provides a counter of received packets between the size of 256 to 511 bytes. The counter
is cleared upon being read.
Note: A bad packet is defined as a packet that has an FCS or Symbol error. For this counter, a packet
This counter will stop at its maximum value of FFFF_FFFFh.
Minimum rollover time at 100Mbps is approximately 1581 hours.
that is not an integral number of bytes is rounded down to the nearest byte.
Register #:
Port0: 0414h
Port1: 0814h
Port2: 0C14h
DESCRIPTION
DATASHEET
330
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Size:
32 bits
TYPE
SMSC LAN9311/LAN9311i
RC
00000000h
DEFAULT
Datasheet