PSB21473FV13XT Infineon Technologies, PSB21473FV13XT Datasheet - Page 595

• Manufacturer Part Number: PSB21473FV13XT
• Manufacturer: Infineon Technologies

Specifications of PSB21473FV13XT

• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 3.135V
• Operating Supply Voltage (max): 3.6V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 144
• Lead Free Status / RoHS Status: Compliant

HW-reset) will be lengthened if the internal clocking system (oscillator and PLL) is still
not stabilized (see above). In these cases the internal system reset signal RST is
lengthened and the execution of first instruction after reset is delayed until the PLL is
stabilized.
Note: The start delay because of Flash voltage and/or clock system rampup and
The reset(setup) lengthening conditions are indicated to the SCU by dedicated
lengthening or busy signals. The total time of the conditions delaying the execution of
first instruction after reset or wakeup is called the setup time.
Note: The above described lengthening conditions for setup control do not lengthen the
Figure 24-2 External Reset Circuitry
Data Sheet
stabilisation time also has to be considered in case of wakeup from Idle mode. In
these cases the start is not delayed by reset lengthening; but a setup-active signal
is provided to the core to delay the execution of first instruction (system hold is
lengthened by start delay of clock distribution).
sampling time of startup configuration and the bidirectional reset on RSTIN pin .
INCA-D
595
System Reset
PSB 21473
2003-03-31
INCA-D