SR2400PP Intel, SR2400PP Datasheet - Page 112

• Manufacturer Part Number: SR2400PP
• Manufacturer: Intel

Specifications of SR2400PP

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Platform Management
Degraded Condition
5.2.9.1.3
The Chassis ID LED provides a visual indication of a system being serviced. The state of the
Chassis ID LED is toggled by the chassis ID button or it can be controlled by the Chassis
Identify command.
Blue
5.2.9.2
The mBMC monitors the control panel switches and other chassis signals. The control panel
input buttons are momentary contact switches, which are de-bounced by the mBMC processor
firmware. The de-bounce time is 25 ms.
5.2.9.2.1
Some platforms support chassis intrusion detection. On those platforms, the mBMC monitors
chassis intrusion by polling the server input/output (SIO) device. The state of the chassis
intrusion input is provided by the status register of the SIO device. A Chassis Intrusion event is
logged in the System Event Log when a change in the input state is detected.
5.2.9.2.2
The Power Button signal toggles system power. The Power Button signal to the mBMC is
activated by a momentary contact switch on the control panel assembly.
The mBMC de-bounces the signal. After de-bouncing the signal, the mBMC routes it directly to
the chipset via the Power Button signal. If the chipset has been initialized by the BIOS, the
chipset responds to the assertion of the signal. It reacts to the press of the switch, not the
release of it.
If the system is in Secure Mode or if the Power Button is forced protected, then when the power
switch is pressed, a Platform Security Violation Attempt event message is generated. No power
control action is taken.
In the case of simultaneous button presses, the Power Button action takes priority over all other
buttons. Due to the routing of the de-bounced Power Button signal to the chipset, the power
signal action overrides the action of the other switch signals.
112
Color
One or more processors are disabled by Fault Resilient Boot (FRB) (not supported by
the Server Board SE7320VP2)
Off
Blink
Condition
Chassis ID LED
Control Panel Inputs
Chassis Intrusion
Power Button
Ok
Identify button pressed or Chassis Identify command executed
Intel order number C91056-002
Table 54. Chassis ID LED
When
Intel® Server Board SE7320VP2
Revision 2.1