SR2400PP Intel, SR2400PP Datasheet - Page 181

• Manufacturer Part Number: SR2400PP
• Manufacturer: Intel

Specifications of SR2400PP

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Intel® Server Board SE7320VP2
Revision 2.1
The Server Board SE7320VP2, as integrated into the Server Chassis SR1400 LC to
form the Server Platform SR1435VP2 or in the Server Chassis SR2400, will support
FCC Class A with 3dB of margin. The margin of compliance can be greatly improved if
shielded Ethernet cables are used.
When adding or removing components or peripherals from the server board, AC power
must be removed. With AC plugged in to the server board, 5-volt standby is still present
even though the server board is powered off.
Processors must be installed in order. CPU 1 is located near the edge of the server
board and must be populated to operate the board.
On the back edge of the server board are four diagnostic LEDs which display a
sequence of Red, Green, or Amber POST codes during the boot process. Should your
server board hang during POST, the LEDs will display the last POST event run before
the hang. The decoder for these POST code LED sequences can be found in section 6.5
of this document.
The active riser card is not supported on the Intel
Slots in the full-height riser should be populated bottom to top in the 2U system.
Appendix A: Integration and Usage Tips
Intel order number C91056-002
®
Appendix A: Integration and Usage Tips
Server Board SE7320VP2.
181