SR2400PP Intel, SR2400PP Datasheet - Page 119

• Manufacturer Part Number: SR2400PP
• Manufacturer: Intel

Specifications of SR2400PP

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Intel® Server Board SE7320VP2
5.2.21
The mBMC implements most of the IPMI 1.5 alerting features. The following features are supported:
5.2.21.1
The mBMC monitors platform health and logs failure events into the SEL. The Platform Event
Filtering (PEF) feature provides a configurable mechanism to allow events to trigger alert
actions. PEF provides a flexible, general mechanism that enables the mBMC to perform
selectable actions triggered by a configurable set of platform events. The mBMC supports the
following IPMI PEF actions:
In addition, the mBMC supports the following OEM actions:
The power-down, soft-shutdown, power cycle and reset actions can be delayed by a specified
number of 100ms up to the maximum PEF delay defined in the IPMI 1.5 specification.
The mBMC maintains an Event Filter table with 30 entries that are used to select which actions
to perform and one fixed/read-only Alert Policy Table entry. No alert strings are supported.
Note: All Fault/Status LED and ID LED behaviors are driven off of PEF. PEF should not be
disabled and the default entry configuration should not be modified or else those behaviors will
be changed.
Each time the PEF module receives an event message, either externally or internally generated,
it compares the event data against the entries in the Event Filter table. The mBMC scans all
entries in the table and determines a set of actions to be performed according to the entries that
were matched. Actions are then executed in order of priority. If there is a combination of power
down, power cycle, and/or reset actions, the actions are performed according to PEF Action
Priorities.
Note: An action that has changed from delayed to non-delayed, or an action whose delay time
has been reduced automatically has higher priority. The mBMC can be configured to log PEF
actions as SEL events.
Revision 2.1
PEF
Alert over LAN
Power-down
Soft-shutdown (pulse ACPI power button signal)
Power cycle
Reset
Diagnostic Interrupt
Alert
Fault LED action
Identification LED action
Device feedback (Generate specified transaction on peripheral SMBus, or change level
of DEIO pins)
Event Filtering and Alerting
Platform Event Filtering (PEF)
Intel order number C91056-002
Platform Management
119