SR2400PP Intel, SR2400PP Datasheet - Page 32

• Manufacturer Part Number: SR2400PP
• Manufacturer: Intel

Specifications of SR2400PP

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Functional Architecture
The Server Board SE7320VP2 provides the following maximum memory capacities based on
the number of DIMM slots provided and maximum supported memory loads by the chipset:
The minimum memory supported with the system running in single channel memory mode is:
Supported DIMM capacities are as follows:
DIMMs on channel A are paired with DIMMs on channel B to configure 2-way interleaving. Each
DIMM pair is referred to as a bank. The bank can be further divided into two rows, based on
single-sided or double-sided DIMMs. If both DIMMs in a bank are single-sided, only one row is
said to be present. For double-sided DIMMs, both rows are said to be present.
The Server Board SE7320VP2 has six DIMM slots, or three DIMM banks. Both DIMMs in a
bank should be identical (same manufacturer, CAS latency, number of rows, columns and
devices, timing parameters etc.). Although DIMMs within a bank must be identical, the BIOS
supports various DIMM sizes and configurations allowing the banks of memory to be different.
Memory sizing and configuration is guaranteed only for qualified DIMMs approved by Intel.
32
24GB maximum capacity for DDR-266
16GB maximum capacity for DDR-333 and DDR2-400
256MB for DDR-266, DDR-333, and DDR2-400
DDR-266 Memory DIMM sizes include: 256MB, 512MB, 1GB, 2GB, and 4GB
DDR-333 Memory DIMM sizes include: 256MB, 512MB, 1GB, 2GB, and 4GB
DDR2-400 Memory DIMM sizes include: 256MB, 512MB, 1GB, 2GB, and 4GB
X8, single row
X8, double row
X4, single row
X4, Stacked, double row
SDRAM Parts / SDRAM Technology Used
Table 3. DIMM Module Capacities
Intel order number C91056-002
128MB
256MB
256MB
512MB
128Mb
256MB
512MB
512MB
1GB
256Mb
Intel® Server Board SE7320VP2
512MB
1GB
1GB
2GB
512Mb
4GB
1GB
2GB
2GB
1Gb
Revision 2.1